{"id":5173,"date":"2019-04-01T13:40:37","date_gmt":"2019-04-01T05:40:37","guid":{"rendered":"https:\/\/believeindustry.company\/?p=5173"},"modified":"2026-04-08T14:38:06","modified_gmt":"2026-04-08T06:38:06","slug":"material-influence-roll-forming-machine-design","status":"publish","type":"post","link":"https:\/\/believeindustry.company\/id\/material-influence-roll-forming-machine-design\/","title":{"rendered":"Raw Material Influence Roll Forming Machine Design"},"content":{"rendered":"

Materials are selected to suit the specified product requirements at the possible lowest price. <\/span>However, the mechanical properties, surface, deviation from thickness, width, straightness, and flatness of the raw material influence roll forming machine design.<\/span><\/p>\n

Mechanical Properties<\/strong><\/h2>\n

During proses pembentukan gulungan<\/a>, the strain (elongation) of the outside fiber of the strip must remain below the uniform engineering strain. <\/span>Therefore, the forming machine designer must know the yield strength, maximum tensile strength, and elongation of the material. <\/span>These data are usually available from the material supplier.<\/span><\/p>\n

In low carbon steel, the correlation between hardness and tensile strength is reasonably good. <\/span>Therefore, hardness is sometimes used to check the material soft or hard.\u00a0<\/span>However, good hardness material does not guaranty good formability.<\/span> Cold work such as roll forming, tensioning, compressing, and other operations. Which will increase the yield and tensile strengths and reduce elongation.<\/span>
\n<\/span><\/p>\n

Based on past experience, the roll forming machine designer can usually judge the anticipated formability of the material,\u00a0including the minimum radius and springback. And <\/span>materials having high yield strength, small difference between tensile and yield stresses, and small\u00a0elongation require more forming passes.<\/span><\/p>\n

Springback Of Material Influence Roll Forming Machine Design<\/strong><\/h2>\n

The method of roll forming and elastic modulus of the material will influence the mechanical properties of the material, springback.<\/p>\n

Tolerance of <\/strong>Material Influence Roll Forming Machine Design<\/strong><\/h2>\n

Ketebalan<\/strong><\/h3>\n

The material must be able to pass through the gap between the rolls without thickness reduction. <\/span>Therefore, roll gap is calculated as the sum of the maximum specified thickness plus maximum thickness tolerance plus maximum coating thickness plus the maximum depth of embossing.<\/span><\/p>\n

Attempting to roll forming thicker material than the specified maximum thickness could break the rollers, damage the equipment, reduce the quality of the product. And additionally create waviness, scratches, or other problems.<\/span>\u00a0The thickness also affects the strip width. <\/span>The width and dimensions are calculated for\u00a0the mean thickness. <\/span>If the thickness is at the maximum plus tolerance, then some dimensions will be smaller. And <\/span>If the thickness is at the minus tolerance, then some dimensions will be larger.<\/span><\/p>\n

Width<\/strong><\/h3>\n

Width tolerance will obviously influence some dimensions of the product. In most cases, the strip width tolerance will add to the roll forming tolerance at the outside lip. If this dimension is critical and is tightly controlled, then the extra material may gather at the center, creating waviness and other problems.<\/p>\n

Percayalah pada Perusahaan Industri<\/a>\u00a0have an experienced team to design the machines. And the designs catch up to the latest technology in the world.<\/p>\n

View More>> : Roll Forming Machine Design<\/a><\/p>","protected":false},"excerpt":{"rendered":"

Materials are selected to suit the specified product requirements at the possible lowest price. However, the mechanical properties, surface, deviation from thickness, width, straightness, and flatness of the raw material influence roll forming machine design. Mechanical Properties During roll forming process, the strain (elongation) of the outside fiber of the strip must remain below the […]<\/p>\n","protected":false},"author":1,"featured_media":5174,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_angie_page":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"page_builder":"","_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"_wpas_customize_per_network":false,"jetpack_post_was_ever_published":false},"categories":[607849853],"tags":[607849931],"class_list":["post-5173","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-rollforming-machine-design","tag-material-influence-roll-forming-machine-design"],"blocksy_meta":[],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/believeindustry.company\/wp-content\/uploads\/2019\/04\/material-influence-roll-forming-machine-design.jpg","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9K5n8-1lr","jetpack_likes_enabled":false,"jetpack-related-posts":[{"id":1434,"url":"https:\/\/believeindustry.company\/id\/roll-former\/","url_meta":{"origin":5173,"position":0},"title":"PENGARUH MATERIAL SAAT MERANCANG PEMBENTUK ROL","author":"Darren Mao","date":"April 21, 2018","format":false,"excerpt":"The Mechanical properties, surface, thickness deviation, width, straightness and flatness tolerance of the material will affect to roll former design MATERIAL INFLUENCE WHILE DESIGN THE ROLL FORMER Mechanical Properties The mechanical properties of the material can be obtained from the material supplier. When cold roll formed, the mechanical properties of\u2026","rel":"","context":"dalam "Roll Forming Machine"","block_context":{"text":"Roll Forming Machine","link":"https:\/\/believeindustry.company\/id\/category\/roll-forming-machine\/"},"img":{"alt_text":"roll former","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":20775,"url":"https:\/\/believeindustry.company\/id\/custom-profile-roll-forming-engineering\/","url_meta":{"origin":5173,"position":1},"title":"Custom Profile Roll Forming Engineering: 7 Powerful Secrets for Precision Manufacturing","author":"Darren Mao","date":"Maret 3, 2026","format":false,"excerpt":"In the high-stakes world of industrial manufacturing, custom profile roll forming engineering is the bridge between a complex blueprint and a structural reality. Success depends on more than just machinery; it requires a deep understanding of material physics, flower pattern optimization, and mechanical deflection management. What is custom profile roll\u2026","rel":"","context":"dalam "Roll Forming Machine"","block_context":{"text":"Roll Forming Machine","link":"https:\/\/believeindustry.company\/id\/category\/roll-forming-machine\/"},"img":{"alt_text":"Custom Profile Roll Forming Engineering","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/customized-profile-roll-forming-machine-jpg.webp?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/customized-profile-roll-forming-machine-jpg.webp?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/customized-profile-roll-forming-machine-jpg.webp?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":5149,"url":"https:\/\/believeindustry.company\/id\/grooves-affect-roll-forming-machine-design\/","url_meta":{"origin":5173,"position":2},"title":"Formed or Stretched Grooves Affect Roll Forming Machine Design","author":"Darren Mao","date":"Maret 20, 2019","format":false,"excerpt":"Formed or Stretched Grooves Frequently, relatively shallow grooves are design to improve appearance, minimize center waviness or add strength to the product. The grooves can be either formed or stretched into the flat area. \u00a0 Where to form or sketch the flutes? If the flutes are roll formed, then they\u2026","rel":"","context":"dalam "RollForming Machine Design"","block_context":{"text":"RollForming Machine Design","link":"https:\/\/believeindustry.company\/id\/category\/rollforming-machine-design\/"},"img":{"alt_text":"roll forming roller for grooves","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-roller-for-grooves.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-roller-for-grooves.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-roller-for-grooves.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-roller-for-grooves.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":20919,"url":"https:\/\/believeindustry.company\/id\/bluescope-steel-roll-forming-machine\/","url_meta":{"origin":5173,"position":3},"title":"BlueScope Steel Roll Forming Machine: 7 Powerful Secrets for Zero-Defect Production","author":"Darren Mao","date":"Maret 16, 2026","format":false,"excerpt":"When dealing with premium materials like COLORBOND\u00ae and ZINCALUME\u00ae, a standard machine simply won't suffice. To achieve a flawless finish and structural integrity, your facility requires a high-performance BlueScope steel roll forming machine designed for 2026 manufacturing standards. Why BlueScope Steel Roll Forming Requires Specialized Engineering Processing high-tensile steel from\u2026","rel":"","context":"dalam "Roll Forming Machine"","block_context":{"text":"Roll Forming Machine","link":"https:\/\/believeindustry.company\/id\/category\/roll-forming-machine\/"},"img":{"alt_text":"BlueScope steel roll forming machine","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/Springback-in-Roll-Forming.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/Springback-in-Roll-Forming.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/Springback-in-Roll-Forming.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":5165,"url":"https:\/\/believeindustry.company\/id\/roll-forming-machine-tolerance\/","url_meta":{"origin":5173,"position":4},"title":"Roll Forming Machine Tolerance","author":"Darren Mao","date":"Maret 26, 2019","format":false,"excerpt":"Compared with bending and cutting machine. Roll Forming Machine Tolerance will be a bit big. But considering the speed of the machine, the end users will also prefer the roll forming machine. Cross Section Tolerance The customer, the product designer, and the roll designer must agree on the interpretation of\u2026","rel":"","context":"dalam "RollForming Machine Design"","block_context":{"text":"RollForming Machine Design","link":"https:\/\/believeindustry.company\/id\/category\/rollforming-machine-design\/"},"img":{"alt_text":"roll forming machine tolerance","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-machine-tolerance.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-machine-tolerance.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-machine-tolerance.png?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":2569,"url":"https:\/\/believeindustry.company\/id\/roll-former-machine\/","url_meta":{"origin":5173,"position":5},"title":"Panduan Pemecahan Masalah dan Pencegahan Masalah pada Mesin Pembentuk Rol","author":"Darren Mao","date":"Agustus 3, 2018","format":false,"excerpt":"From this post, you will know what the troubles of operating the roll former machine you will meet, and how to preventing the troubles. Roll Former Machine Troubleshooting and Trouble Prevention The Root of Troubles Problems Created by Design and Drawings Problems Created by The Material Problems Created by The\u2026","rel":"","context":"dalam "Roll Forming Machine"","block_context":{"text":"Roll Forming Machine","link":"https:\/\/believeindustry.company\/id\/category\/roll-forming-machine\/"},"img":{"alt_text":"roll forming machine troubleshooting","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/08\/roll-forming-machine-troubleshooting.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/08\/roll-forming-machine-troubleshooting.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/08\/roll-forming-machine-troubleshooting.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/08\/roll-forming-machine-troubleshooting.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/08\/roll-forming-machine-troubleshooting.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]}],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/posts\/5173","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/comments?post=5173"}],"version-history":[{"count":1,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/posts\/5173\/revisions"}],"predecessor-version":[{"id":21662,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/posts\/5173\/revisions\/21662"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/media\/5174"}],"wp:attachment":[{"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/media?parent=5173"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/categories?post=5173"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/tags?post=5173"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}