{"id":5392,"date":"2019-04-08T10:35:43","date_gmt":"2019-04-08T02:35:43","guid":{"rendered":"https:\/\/believeindustry.company\/?p=5392"},"modified":"2026-04-08T14:42:08","modified_gmt":"2026-04-08T06:42:08","slug":"desain-gulungan","status":"publish","type":"post","link":"https:\/\/believeindustry.company\/id\/roll-design\/","title":{"rendered":"Pengaruh Desain Rol pada Mesin Pembentukan Rol"},"content":{"rendered":"

Rolls design<\/strong> must match the roll forming mill. The roll designer must have all the relevant equipment dimensions and other data which can influence <\/span>roll design. Otherwise the machine will be very costly.\u00a0<\/span><\/p>\n

Types of Mills Influence Roll Design<\/strong><\/h2>\n

Cantilever Mill\u00a0<\/strong><\/p>\n

This type of mill limits the formable strip width to about the length of the short shafts. <\/span>If only one edge of wide strip is to be formed, then the opposite edge should be properly guided. <\/span>In this case, it is more practical for all the material used for forming to be taken from the drive side and locate the sheet guide at the operator side of the rolls.<\/span><\/p>\n

\"Cantilever<\/p>\n

Pabrik Dupleks<\/strong><\/p>\n

Two cantilever mills facing each other, forming both edges of the strip simultaneously are called a duplex mill. Adjusting one or both mills in-and-out enables the roll forming various widths within the limits of the mill.<\/p>\n

The roll designer should take the following into consideration:<\/div>\n
    \n
  1. Maximum roll length is limited.<\/li>\n
  2. The forming pressure of the ends of the rolls may bend the shafts.<\/li>\n
  3. While produce wider profile, the mill should be equipped with supports between roll forming stands.<\/li>\n
  4. The minimum length of the shortest profile should not be less than twice the roll stands distance plus 50mm.<\/li>\n
  5. This mill need more guiders to avoid skewing.<\/li>\n<\/ol>\n

    Duplex Through Shaft Mill<\/strong><\/p>\n

    Compared with duplex mill, this design mill will have a 50% higher capacity with same shaft diameter and roll length.<\/div>\n
    Most items that have to be considered when designing rolls for duplex mills also have to be\u00a0taken into consideration for the duplex through shaft mills. <\/span>The difference is that due to the\u00a0added sleeves, the roll diameters of the through shaft mill will be larger and the horizontal\u00a0centers are usually greater. <\/span>Adjustable center-support rolls for the product can be installed on\u00a0the shafts<\/span><\/div>\n
    \"Through<\/div>\n

    <\/h3>\n

    Standard Mill<\/strong><\/p>\n

    The majority of roll forming mills have the shafts supported by bearings at both ends. Most of the previously mentioned factors and several others have to be considered for standard mills<\/p>\n

    Lihat Selengkapnya>> : Desain Mesin Pembentuk Gulungan<\/a><\/p>\n

    Percayalah pada Perusahaan Industri<\/a> is engaged in design and manufacturer roll forming machines for over than 20 years. We have different kinds of roll forming machine and related equipments for different applications. Contact us now for more information.<\/p>","protected":false},"excerpt":{"rendered":"

    Rolls design must match the roll forming mill. The roll designer must have all the relevant equipment dimensions and other data which can influence roll design. Otherwise the machine will be very costly.\u00a0 Types of Mills Influence Roll Design Cantilever Mill\u00a0 This type of mill limits the formable strip width to about the length of […]<\/p>\n","protected":false},"author":1,"featured_media":5395,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_angie_page":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"page_builder":"","_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"_wpas_customize_per_network":false,"jetpack_post_was_ever_published":false},"categories":[607849853],"tags":[607849941,607849942],"class_list":["post-5392","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-rollforming-machine-design","tag-roll-design","tag-roller-design"],"blocksy_meta":[],"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/believeindustry.company\/wp-content\/uploads\/2019\/04\/roll-design.png","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9K5n8-1oY","jetpack_likes_enabled":false,"jetpack-related-posts":[{"id":2837,"url":"https:\/\/believeindustry.company\/id\/roll-forming-machine-roller-design\/","url_meta":{"origin":5392,"position":0},"title":"Desain Rol: Gambar Profil Baja","author":"Darren Mao","date":"Agustus 15, 2018","format":false,"excerpt":"Roll Forming Machine Design Complexity of profile drawings The profile drawings of the roll formed profiles is the most signficant factor in roll forming machine roller design. There variety of shapes is not limited. And the shapes can be arbitrarily classified as Simple, Open, Closed, Medium Complex, Very Complex and\u2026","rel":"","context":"dalam "Company News"","block_context":{"text":"Company News","link":"https:\/\/believeindustry.company\/id\/category\/company-news\/"},"img":{"alt_text":"roll forming machine design","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/09\/roll-forming-machine-design.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/09\/roll-forming-machine-design.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/09\/roll-forming-machine-design.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/09\/roll-forming-machine-design.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/09\/roll-forming-machine-design.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":5165,"url":"https:\/\/believeindustry.company\/id\/roll-forming-machine-tolerance\/","url_meta":{"origin":5392,"position":1},"title":"Toleransi Mesin Pembentukan Rol","author":"Darren Mao","date":"Maret 26, 2019","format":false,"excerpt":"Compared with bending and cutting machine. Roll Forming Machine Tolerance will be a bit big. But considering the speed of the machine, the end users will also prefer the roll forming machine. Cross Section Tolerance The customer, the product designer, and the roll designer must agree on the interpretation of\u2026","rel":"","context":"dalam "RollForming Machine Design"","block_context":{"text":"RollForming Machine Design","link":"https:\/\/believeindustry.company\/id\/category\/rollforming-machine-design\/"},"img":{"alt_text":"roll forming machine tolerance","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-machine-tolerance.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-machine-tolerance.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/03\/roll-forming-machine-tolerance.png?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":5173,"url":"https:\/\/believeindustry.company\/id\/material-influence-roll-forming-machine-design\/","url_meta":{"origin":5392,"position":2},"title":"Desain Mesin Pembentuk Gulungan yang Dipengaruhi Bahan Baku","author":"Darren Mao","date":"April 1, 2019","format":false,"excerpt":"Materials are selected to suit the specified product requirements at the possible lowest price. However, the mechanical properties, surface, deviation from thickness, width, straightness, and flatness of the raw material influence roll forming machine design. Mechanical Properties During roll forming process, the strain (elongation) of the outside fiber of the\u2026","rel":"","context":"dalam "RollForming Machine Design"","block_context":{"text":"RollForming Machine Design","link":"https:\/\/believeindustry.company\/id\/category\/rollforming-machine-design\/"},"img":{"alt_text":"material influence roll forming machine design","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/04\/material-influence-roll-forming-machine-design.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/04\/material-influence-roll-forming-machine-design.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2019\/04\/material-influence-roll-forming-machine-design.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":1434,"url":"https:\/\/believeindustry.company\/id\/roll-former\/","url_meta":{"origin":5392,"position":3},"title":"PENGARUH MATERIAL SAAT MERANCANG PEMBENTUK ROL","author":"Darren Mao","date":"April 21, 2018","format":false,"excerpt":"The Mechanical properties, surface, thickness deviation, width, straightness and flatness tolerance of the material will affect to roll former design MATERIAL INFLUENCE WHILE DESIGN THE ROLL FORMER Mechanical Properties The mechanical properties of the material can be obtained from the material supplier. When cold roll formed, the mechanical properties of\u2026","rel":"","context":"dalam "Roll Forming Machine"","block_context":{"text":"Roll Forming Machine","link":"https:\/\/believeindustry.company\/id\/category\/roll-forming-machine\/"},"img":{"alt_text":"roll former","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/roll-former.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":2022,"url":"https:\/\/believeindustry.company\/id\/cold-roll-former-cutting-position\/","url_meta":{"origin":5392,"position":4},"title":"Posisi Pemotong Pembentuk Gulungan Dingin","author":"Darren Mao","date":"Mei 29, 2018","format":false,"excerpt":"Cold Roll Former Cutting Position As we know that, a continuous cold roll former( cold roll forming machine) is a whole line with the cutoff die. The Coil strips move continuously during the roll forming production. \u00a0Only if you use a very simple roll former which is adopt cut-into-piece sheets\u2026","rel":"","context":"dalam "Industry News"","block_context":{"text":"Industry News","link":"https:\/\/believeindustry.company\/id\/category\/industry-news\/"},"img":{"alt_text":"Cold Roll Former Cutting","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/05\/Cold-Roll-Former-Cutting.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/05\/Cold-Roll-Former-Cutting.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/05\/Cold-Roll-Former-Cutting.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/05\/Cold-Roll-Former-Cutting.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/05\/Cold-Roll-Former-Cutting.jpg?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":1473,"url":"https:\/\/believeindustry.company\/id\/roll-forming-process\/","url_meta":{"origin":5392,"position":5},"title":"Proses Mesin Pembentukan Gulungan untuk Produksi Berefisiensi Tinggi","author":"Darren Mao","date":"April 24, 2018","format":false,"excerpt":"Proses Pembentukan Gulungan dapat membantu Anda memahami cara kerja mesin pembentuk gulungan dengan mudah sebelum Anda membeli Mesin Pembentuk Gulungan. Believe Industry Company bergerak di bidang perancangan dan pembuatan Mesin Pembentuk Gulungan sesuai dengan gambar yang diinginkan, dan Proses Pembentukan Gulungan didasarkan pada produk tersebut.","rel":"","context":"dalam "Roll Forming Machine"","block_context":{"text":"Roll Forming Machine","link":"https:\/\/believeindustry.company\/id\/category\/roll-forming-machine\/"},"img":{"alt_text":"rack design2","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/rack-design2.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/rack-design2.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/rack-design2.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2018\/04\/rack-design2.png?resize=700%2C400&ssl=1 2x"},"classes":[]}],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/posts\/5392","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/comments?post=5392"}],"version-history":[{"count":1,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/posts\/5392\/revisions"}],"predecessor-version":[{"id":21714,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/posts\/5392\/revisions\/21714"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/media\/5395"}],"wp:attachment":[{"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/media?parent=5392"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/categories?post=5392"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/believeindustry.company\/id\/wp-json\/wp\/v2\/tags?post=5392"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}