Users often ask us about the differences between HR Steel and CR Steel. There are some fundamental differences between these two types of metal. The differences between HR steel and CR steel relates to the way these metals are processed at the mill, and not the product specification or grade. HR steel involves rolling the steel at high temperatures, where CR steel is processed further in cold reduction mills where the material is cooled followed by annealing and/or tempers rolling.
HR Steel
Hot rolling is a mill process which involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel’s recrystallization temperature. When steel is above the recrystallization temperature, it can be shaped and formed easily, and the steel can be made in much larger sizes. HR steel is typically cheaper than cold rolled steel due to the fact that it is often manufactured without any delays in the process, and therefore the reheating of the steel is not required (as it is with cold rolled). When the steel cools off it will shrink slightly thus giving less control on the size and shape of the finished product when compared to cold rolled.
Uses: HR products like HR steel bars are used in the welding and construction trades to make railroad tracks and I-beams, for example. HR steel is used in situations where precise shapes and tolerances are not required.
CR Steel
CR steel is essentially HR steel that has had further processing. The steel is processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling. This process will produce steel with closer dimensional tolerances and a wider range of surface finishes. The term CR is mistakenly used on all products, when actually the product name refers to the rolling of flat rolled sheet and coil products.
When referring to bar products, the term used is “cold finishing”, which usually consists of cold drawing and/or turning, grinding and polishing. This process results in higher yield points and has four main advantages:
- Cold drawing increases the yield and tensile strengths, often eliminating further costly thermal treatments.
- Turning gets rid of surface imperfections.
- Grinding narrows the original size tolerance range.
- Polishing improves surface finish.
Semua produk sejuk memberikan kemasan permukaan yang unggul, dan lebih unggul dalam toleransi, konsentrik dan kelurusan jika dibandingkan dengan HR.
Cold finished bars are typically harder to work with than HR due to the increased carbon content. However, this cannot be said about CR sheet and HR sheet. With these two products, the CR product has low carbon content and it is typically annealed, making it softer than HR sheet.
Percaya Syarikat Industri mempunyai rangkaian penuh Mesin Pembentuk Roll untuk HR dan CR Steel. Dan juga mempunyai aplikasi yang berbeza garisan membelah untuk HR dan CR. Hubungi kami untuk maklumat lanjut.