{"id":24857,"date":"2026-10-16T09:30:00","date_gmt":"2026-10-16T01:30:00","guid":{"rendered":"https:\/\/believeindustry.company\/strut-channel-roll-forming-machine-cost\/"},"modified":"2026-10-24T23:02:12","modified_gmt":"2026-10-24T15:02:12","slug":"strut-channel-roll-forming-machine-cost","status":"publish","type":"post","link":"https:\/\/believeindustry.company\/ms\/strut-channel-roll-forming-machine-cost\/","title":{"rendered":"Strut Channel Roll Forming Machine Cost: 5 Price Factors 2026"},"content":{"rendered":"<h1>How Much Does a Strut Channel Roll Forming Machine Cost?<\/h1>\n<p><strong>Short answer:<\/strong> A strut channel roll forming machine cost runs from about $28,000 for a 2 to 4 m\/min hydraulic line to about $150,000 for a 25 to 30 m\/min servo-feed line or a 40+ m\/min rotary-punch line. Frame type, profile size, and optional add-ons move the total.<\/p>\n<p>A strut channel roll forming machine cost depends first on how fast the line must run. Speed decides the punching method, the machine frame, and most of the budget. If you are new to the product, read <a href=\"https:\/\/believeindustry.company\/what-is-a-strut-channel\/\">what is a strut channel<\/a> first, then return to price. This guide breaks the market into four speed tiers, shows what each tier includes, and lists the add-ons that change the final number.<\/p>\n<h2>Strut Channel Roll Forming Machine Cost by Line Speed<\/h2>\n<p>The table below maps line speed to the punching method, the frame you should expect, and a realistic price band. Speeds appear in both metric and feet per minute so buyers in the US and metric markets read the same line.<\/p>\n<table>\n<thead>\n<tr>\n<th>Line speed<\/th>\n<th>Speed (fpm)<\/th>\n<th>Punching method<\/th>\n<th>Typical frame<\/th>\n<th>Price (USD)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>2 to 4 m\/min<\/td>\n<td>6.6 to 13 fpm<\/td>\n<td>Hydraulic punch and cutoff (stop to punch)<\/td>\n<td>Wall-plate chain<\/td>\n<td>about $28,000<\/td>\n<\/tr>\n<tr>\n<td>15 to 20 m\/min<\/td>\n<td>49 to 66 fpm<\/td>\n<td>Servo tracking punch, non-stop cutoff<\/td>\n<td>Wall-plate chain<\/td>\n<td>about $100,000<\/td>\n<\/tr>\n<tr>\n<td>25 to 30 m\/min<\/td>\n<td>82 to 98 fpm<\/td>\n<td>Servo feed with high-speed punch press<\/td>\n<td>Cast-iron gearbox<\/td>\n<td>about $150,000<\/td>\n<\/tr>\n<tr>\n<td>40+ m\/min<\/td>\n<td>131+ fpm<\/td>\n<td>Rotary punch (continuous)<\/td>\n<td>Cast-iron gearbox<\/td>\n<td>about $150,000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>These bands cover a standard P1000 or slotted strut profile in mild steel up to 2.5 mm. Thicker coil, wider channels, or extra hole patterns raise the <a href=\"https:\/\/believeindustry.company\/strut-channel-roll-forming-machines-ready-to-ship-to-usa\/\">strut channel roll forming machine cost<\/a> inside each tier.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/believeindustry.company\/wp-content\/uploads\/2026\/10\/roll-forming-section-of-strut-channel-roll-forming-machine-1.webp\" alt=\"Strut channel roll forming machine roll forming section\" title=\"\"><\/p>\n<h2>What Sets the Price at Each Speed Tier<\/h2>\n<p>A 2 to 4 m\/min line is the entry build. It uses a hydraulic punch that stops the strip, punches the holes, then a hydraulic shear cuts to length. The frame is usually wall-plate chain construction. This strut channel roll forming machine cost lands at about $28,000 and suits shops with low to medium daily volume.<\/p>\n<p>A 15 to 20 m\/min line adds a servo tracking punch. The press follows the moving strip and punches without stopping it, so the cutoff is also non-stop. Output climbs several times over the entry tier. Expect about $100,000 for a line of this class, the kind often shipped to regional suppliers covered by our <a href=\"https:\/\/believeindustry.company\/strut-channel-machine-mexico\/\">Mexico market guide<\/a>.<\/p>\n<p>A 25 to 30 m\/min line moves to a servo feed with a high-speed punch press. The heavier duty needs a cast-iron housing gearbox frame for rigidity. This strut channel roll forming machine cost runs about $150,000 and fits continuous shift production.<\/p>\n<p>A 40+ m\/min line uses a rotary punch that stamps holes while the strip flows through continuously. Few suppliers build this reliably. The price of about $150,000 reflects the precision tooling and the cast-iron gearbox base it requires, the same economics behind <a href=\"https:\/\/believeindustry.company\/best-high-volume-roll-forming-machine\/\">high-volume roll forming lines<\/a>.<\/p>\n<h2>Punching Method Decides Throughput and Cost<\/h2>\n<p>The punching method is the largest single cost driver after speed. Four methods appear in the market:<\/p>\n<ul>\n<li>Hydraulic punch and cutoff. Simple, cheap, stops the line for each hole. Best below 4 m\/min.<\/li>\n<li>Servo tracking punch. The press rides the strip and punches on the fly. This is the method behind the 15 to 20 m\/min tier.<\/li>\n<li>Servo feed with high-speed punch press. A separate servo feeds the strip while a press hits 100 to 200 strokes per minute. Needed at 25 to 30 m\/min.<\/li>\n<li>Rotary punch. A rotating die wheel marks holes continuously. The most expensive but the only method that holds 40+ m\/min.<\/li>\n<\/ul>\n<p>Each step up in punching method comes with a stronger frame and drive, which is why the tiers rise from $28,000 to $150,000. Buyers often over-spec the punch and pay for speed they never use. Match the method to your real daily footage, and review our <a href=\"https:\/\/believeindustry.company\/roll-forming-machine-punching-die-installation\/\">punching die installation guide<\/a> before committing to a hole pattern.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/believeindustry.company\/wp-content\/uploads\/2026\/10\/servo-feeder-and-punch-press-on-strut-channel-line-1.webp\" alt=\"Servo feeder and high-speed punch press on a strut channel roll forming line\" title=\"\"><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/believeindustry.company\/wp-content\/uploads\/2026\/10\/flying-saw-cutting-strut-channel-without-blade-change-1.webp\" alt=\"Flying saw cutting strut channel without blade change\" title=\"\"><\/p>\n<h2>Wall-Plate Chain or Cast-Iron Housing Gearbox<\/h2>\n<p>Two frame styles dominate, and they are not interchangeable on size. Wall-plate chain (also called cantilever or wall-board) uses plates bolted to a base with chain drive. It is light, easy to service, and economical. Its limit is profile size: it handles channels up to 1-5\/8 x 1-5\/8 inches (41 x 41 mm), the standard single strut.<\/p>\n<p>The cast-iron housing gearbox uses a rigid iron frame with a geared drive train. It holds tolerances at high speed, absorbs punch reaction without deflection, and handles wider channels up to 1-5\/8 x 3-1\/4 inches (41 x 82 mm), including the deep strut used in racking and solar.<\/p>\n<p>The frame choice adds about $60,000 when you move from wall-plate chain to cast-iron gearbox. A wall-plate chain line suits a single 41 x 41 mm profile at low to medium speed. Above 20 m\/min, or whenever the channel exceeds 1-5\/8 x 1-5\/8, the gearbox is required. A strut channel roll forming machine cost quote that mixes a gearbox frame with a low-speed punch is usually misconfigured.<\/p>\n<h2>Profile, Thickness, and Steel Grade<\/h2>\n<p>Beyond speed, the profile itself moves the number. A plain P1000 channel is cheaper to tool than a slotted section, because slotting needs an extra punch station with tight pitch control. Coil thickness from 1.5 to 2.5 mm runs on standard rolls; 3.0 mm and above needs heavier stands and a stronger frame, which adds $5,000 to $15,000.<\/p>\n<p>A heavier or slotted profile raises the strut channel roll forming machine cost by $5,000 to $15,000 before any speed upgrade. Steel grade matters too. Many export jobs specify electro galvanized or pre galvanized coil, which runs fine through the line. Coating choice affects storage and corrosion resistance, not the machine price, but it changes the delivered cost per meter.<\/p>\n<p>Channels are built to dimensional standards such as <a href=\"https:\/\/www.nema.org\/\" rel=\"nofollow noopener\" target=\"_blank\">NEMA VE-1<\/a> in North America, while international projects align with <a href=\"https:\/\/www.iec.ch\/\" target=\"_blank\" rel=\"noopener\">IEC<\/a> and EN references for cable support systems.<\/p>\n<h2>Optional Add-Ons That Change the Total<\/h2>\n<p>Most quotes start with the base line and add modules. The common ones:<\/p>\n<table>\n<thead>\n<tr>\n<th>Option<\/th>\n<th>What it does<\/th>\n<th>Added cost<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Coil end shearing and butt welder<\/td>\n<td>Joins coil ends so the line runs without stopping for changeover<\/td>\n<td>about $6,500<\/td>\n<\/tr>\n<tr>\n<td>Auto stacker<\/td>\n<td>Stacks finished channels and counts them automatically<\/td>\n<td>about $25,000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>A coil end shearing and butt welder matters most on high-speed lines where stopping to swap coils wastes minutes every hour, and it costs about $6,500. An auto stacker cuts labor on any tier and costs about $25,000. Neither is required, but both raise the strut channel roll forming machine cost in exchange for lower running cost. Other options such as extra punch stations are quoted per project. A proper <a href=\"https:\/\/believeindustry.company\/what-is-coil-slitting\/\">coil slitting setup<\/a> upstream also reduces scrap.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/believeindustry.company\/wp-content\/uploads\/2026\/10\/uncoiler-and-leveler-feeding-strip-on-strut-channel-line-1.webp\" alt=\"Uncoiler and leveler feeding strip on a strut channel roll forming line\" title=\"\"><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/believeindustry.company\/wp-content\/uploads\/2026\/10\/auto-stacker-for-strut-channel-roll-forming-line-1.webp\" alt=\"Auto stacker for a strut channel roll forming line\" title=\"\"><\/p>\n<h2>Typical Configuration and Price Scenarios<\/h2>\n<p>Three real-world builds show how the numbers land:<\/p>\n<ol>\n<li>Small fabricator, P1000 only, 3 m\/min, hydraulic punch, wall-plate chain, manual stack. About $28,000.<\/li>\n<li>Regional supplier, slotted and punched, 18 m\/min, servo tracking punch, wall-plate chain, with auto stacker. About $125,000 (tier-2 line about $100,000 plus auto stacker about $25,000).<\/li>\n<li>Export line, multi-profile, 28 m\/min, servo feed punch press, cast-iron gearbox, with butt welder and stacker. About $182,000 (tier-3 line about $150,000 plus butt welder about $6,500 plus auto stacker about $25,000).<\/li>\n<\/ol>\n<p>These scenarios show why a single price quote is misleading. The strut channel roll forming machine cost is really a configuration question, and a <a href=\"https:\/\/believeindustry.company\/roll-forming-machine-multi-profile\/\">multi-profile line<\/a> can spread the investment across several product families.<\/p>\n<h2>How to Choose the Right Speed Tier<\/h2>\n<p>Start from your required daily footage, not from a budget number. A line running 8 hours at 3 m\/min makes roughly 1.4 km of channel a day. The same hours at 30 m\/min make over 14 km. If you need under 2 km per day, the entry tier is correct and saves $40,000 plus. If you ship containers weekly, the 25 to 30 m\/min tier protects delivery promises.<\/p>\n<p>The right strut channel roll forming machine cost is the one matched to footage, not the cheapest quote on paper. Believe Industry has built custom roll forming lines since 2005, with 80+ engineers and 500+ projects delivered to 50+ countries under ISO 9001 and CE. We size the punching method and frame to your actual profile and volume, so the strut channel roll forming machine cost reflects production need rather than a catalog default.<\/p>\n<p>The <a href=\"https:\/\/believeindustry.company\/roll-forming-machine-usa-market-guide\/\">US market guide<\/a> covers import and compliance steps for North American buyers.<\/p>\n<h2>Frequently Asked Questions of Strut Channel Roll Forming Machine Cost<\/h2>\n<p><strong>Q: What is the lowest strut channel roll forming machine cost for a working line?<\/strong><br \/>\nA basic 2 to 4 m\/min line with hydraulic punching and a wall-plate chain frame starts around $28,000. Add freight and tooling for your profile, and most buyers land near $32,000. An auto stacker adds about $25,000 more.<\/p>\n<p><strong>Q: Why does a high-speed line cost about $150,000?<\/strong><br \/>\nBoth the 25 to 30 m\/min servo-feed line and the 40+ m\/min rotary-punch line land around $150,000. The rotary-punch tier needs continuous tooling and a cast-iron housing gearbox to hold tolerance at speed, and wider or multi-strand builds go higher. The tooling and frame precision are the cost drivers, not the roll stands.<\/p>\n<p><strong>Q: Is a cast-iron gearbox frame worth the extra money?<\/strong><br \/>\nIt adds about $60,000 over a wall-plate chain frame, and it is the only frame that handles channels up to 1-5\/8 x 3-1\/4 inches (41 x 82 mm). The wall-plate chain frame tops out at 1-5\/8 x 1-5\/8 inches (41 x 41 mm). For lines above 20 m\/min, or any channel wider than 41 x 41 mm, the gearbox is required. Below 20 m\/min on a single 41 x 41 mm profile, wall-plate chain is enough and lowers the strut channel roll forming machine cost.<\/p>\n<p><strong>Q: Does a coil end shearing and butt welder pay back?<\/strong><br \/>\nOn high-speed lines it does, because it removes the stop to change coils. At about $6,500 it is a modest add-on that pays back fastest on 25 to 30 m\/min and 40+ m\/min lines. On a 3 m\/min line the savings are small, so the cost is hard to recover.<\/p>\n<p><strong>Q: How much does an auto stacker add?<\/strong><br \/>\nAn auto stacker adds about $25,000. It removes one manual handling step and is worthwhile on any line running more than a single shift.<\/p>\n<p><strong>Q: Can one line make both P1000 and slotted strut?<\/strong><br \/>\nYes, with quick-change or cassette tooling. The multi-profile setup adds cost but lets a single strut channel roll forming machine cost cover several product lines.<\/p>\n<hr \/>\n<p>*Last updated: 2026-10-24*<\/p>\n<p>*Article Changelog: 2026-10-16: Initial publication. 2026-10-24: Revised all price points to current tiers (about $28,000 \/ $100,000 \/ $150,000 \/ $150,000), added frame price gap (about $60,000) and profile-size limits (wall-plate chain 1-5\/8 x 1-5\/8 vs gearbox 1-5\/8 x 3-1\/4), updated add-on prices (butt welder about $6,500, auto stacker about $25,000), and added machine photos.*<\/p>\n<p>*Next Review Triggers: Steel coil price moves beyond 15 percent; a major buyer requests a 50+ m\/min tier; frame price gap shifts.*<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the lowest strut channel roll forming machine cost for a working line?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A basic 2 to 4 m\/min line with hydraulic punching and a wall-plate chain frame starts around $28,000. Add freight and tooling for your profile, and most buyers land near $32,000. An auto stacker adds about $25,000 more.\"}},{\"@type\":\"Question\",\"name\":\"Why does a high-speed line cost about $150,000?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Both the 25 to 30 m\/min servo-feed line and the 40+ m\/min rotary-punch line land around $150,000. The rotary-punch tier needs continuous tooling and a cast-iron housing gearbox to hold tolerance at speed, and wider or multi-strand builds go higher. The tooling and frame precision are the cost drivers, not the roll stands.\"}},{\"@type\":\"Question\",\"name\":\"Is a cast-iron gearbox frame worth the extra money?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It adds about $60,000 over a wall-plate chain frame, and it is the only frame that handles channels up to 1-5\/8 x 3-1\/4 inches (41 x 82 mm). The wall-plate chain frame tops out at 1-5\/8 x 1-5\/8 inches (41 x 41 mm). For lines above 20 m\/min, or any channel wider than 41 x 41 mm, the gearbox is required. Below 20 m\/min on a single 41 x 41 mm profile, wall-plate chain is enough and lowers the strut channel roll forming machine cost.\"}},{\"@type\":\"Question\",\"name\":\"Does a coil end shearing and butt welder pay back?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"On high-speed lines it does, because it removes the stop to change coils. At about $6,500 it is a modest add-on that pays back fastest on 25 to 30 m\/min and 40+ m\/min lines. On a 3 m\/min line the savings are small, so the cost is hard to recover.\"}},{\"@type\":\"Question\",\"name\":\"How much does an auto stacker add?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An auto stacker adds about $25,000. It removes one manual handling step and is worthwhile on any line running more than a single shift.\"}},{\"@type\":\"Question\",\"name\":\"Can one line make both P1000 and slotted strut?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, with quick-change or cassette tooling. The multi-profile setup adds cost but lets a single strut channel roll forming machine cost cover several product lines.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>How Much Does a Strut Channel Roll Forming Machine Cost? Short answer: A strut channel roll forming machine cost runs from about $28,000 for a 2 to 4 m\/min hydraulic line to about $150,000 for a 25 to 30 m\/min servo-feed line or a 40+ m\/min rotary-punch line. Frame type, profile size, and optional add-ons [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":24861,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"page_builder":"","_wpcom_ai_launchpad_first_post":false,"_jetpack_hide_featured_image":false,"_jetpack_featured_image_duplicate_dismissed":0,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"{title}\n\n{excerpt}\n\n{url}","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"_wpas_customize_per_network":false,"jetpack_post_was_ever_published":false},"categories":[607852264,607852051],"tags":[607846423,607852464,607852456,607852469,607852460,607852458,607852467,607852461,607852459,607852466,607852462,607852457,607852468,607852463,607852465],"class_list":["post-24857","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industrial-equipment","category-roll-forming-machines","tag-believe-industry-company","tag-channel-machine-cost","tag-how-much-does-strut-channel-machine-cost","tag-machine-price","tag-multi-profile-strut-price","tag-p1000-machine-price","tag-price-guide","tag-punching-system-cost","tag-slotted-strut-price","tag-strut-channel-cost","tag-strut-channel-roll-former-price","tag-strut-channel-roll-forming-machine-cost","tag-strut-machine","tag-strut-machine-investment","tag-strut-production-cost"],"blocksy_meta":[],"jetpack_publicize_connections":[],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9K5n8-6sV","jetpack_likes_enabled":false,"jetpack-related-posts":[{"id":22390,"url":"https:\/\/believeindustry.company\/ms\/solar-strut-channel-roll-forming-machine\/","url_meta":{"origin":24857,"position":0},"title":"Mesin Pembentuk Gulungan Saluran Strut Suria: 5 Penyelesaian Tebuk &amp; Panduan Lengkap 2026","author":"Darren Mao","date":"Mei 5, 2026","format":false,"excerpt":"What Is a Solar Strut Channel Roll Forming Machine?A\u00a0solar strut channel roll forming machine\u00a0is a production line that takes steel coil and forms it into slotted U-channels. These channels are the main structural part of solar panel mounting systems. Key facts: Input: galvanized or pre-painted steel coil, 1.5\u20133.0 mm thick\u2026","rel":"","context":"In &quot;Application&quot;","block_context":{"text":"Application","link":"https:\/\/believeindustry.company\/ms\/category\/application\/"},"img":{"alt_text":"solar strut channel roll forming machine","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/05\/solar-strut-channel-roll-forming-machine.webp?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/05\/solar-strut-channel-roll-forming-machine.webp?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/05\/solar-strut-channel-roll-forming-machine.webp?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/05\/solar-strut-channel-roll-forming-machine.webp?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/05\/solar-strut-channel-roll-forming-machine.webp?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/05\/solar-strut-channel-roll-forming-machine.webp?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":21095,"url":"https:\/\/believeindustry.company\/ms\/strut-channel-machine-mexico\/","url_meta":{"origin":24857,"position":1},"title":"Mesin profil U Mexico: panduan pembeli untuk kegunaan industri dan solar","author":"Darren Mao","date":"Mac 20, 2026","format":false,"excerpt":"Strut Channel Machine Mexico: A Buyer Guide for Industrial and Solar A strut channel machine for Mexico builds the slotted steel sections used in factories, data centers, and solar farms across the country. The common profiles are 41x41 mm and 41x21 mm Unistrut types, usually galvanized and often pre-punched. A\u2026","rel":"","context":"In &quot;Application&quot;","block_context":{"text":"Application","link":"https:\/\/believeindustry.company\/ms\/category\/application\/"},"img":{"alt_text":"Strut Channel Machine Mexico","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/Strut-Channel-Roll-Former.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/Strut-Channel-Roll-Former.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/Strut-Channel-Roll-Former.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/03\/Strut-Channel-Roll-Former.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":24818,"url":"https:\/\/believeindustry.company\/ms\/strut-channel-roll-forming-machines-ready-to-ship-to-usa\/","url_meta":{"origin":24857,"position":2},"title":"3 Mesin Roll Forming Saluran Strut Sedia untuk Dihantar ke AS","author":"Darren Mao","date":"Oktober 21, 2026","format":false,"excerpt":"3 Strut Channel Roll Forming Machines Ready to Ship to the United States A new strut channel roll forming machine order has finished production at our factory and is packed for shipment to a customer in the United States. The order covers three complete lines built to the same layout.\u2026","rel":"","context":"In &quot;Company News&quot;","block_context":{"text":"Company News","link":"https:\/\/believeindustry.company\/ms\/category\/company-news\/"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/10\/feature-strut-channel-roll-forming-machines-ready-to-ship-to-the-united-states.webp?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/10\/feature-strut-channel-roll-forming-machines-ready-to-ship-to-the-united-states.webp?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/10\/feature-strut-channel-roll-forming-machines-ready-to-ship-to-the-united-states.webp?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/10\/feature-strut-channel-roll-forming-machines-ready-to-ship-to-the-united-states.webp?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/10\/feature-strut-channel-roll-forming-machines-ready-to-ship-to-the-united-states.webp?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":22990,"url":"https:\/\/believeindustry.company\/ms\/p-series-strut-channel-roll-forming-machine\/","url_meta":{"origin":24857,"position":3},"title":"P Series Strut Channel Roll Forming Machine [2026 Buyer&#8217;s Guide]","author":"Darren Mao","date":"Jun 12, 2026","format":false,"excerpt":"Memilih siri saluran strut yang betul bukan sekadar pilihan dimensi. Ia menentukan kelengkapan yang boleh anda gunakan, beban yang dibawa oleh sistem dan ketebalan keluli yang mesti dikendalikan oleh mesin pembentuk gulung. Menentukan siri yang salah memerlukan wang dalam spesifikasi yang berlebihan atau gagal memeriksa apabila saluran\u2026","rel":"","context":"In &quot;Application&quot;","block_context":{"text":"Application","link":"https:\/\/believeindustry.company\/ms\/category\/application\/"},"img":{"alt_text":"P Series Strut Channel Roll Forming Machine","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/06\/P-Series-Strut-Channels.webp?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/06\/P-Series-Strut-Channels.webp?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/06\/P-Series-Strut-Channels.webp?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/06\/P-Series-Strut-Channels.webp?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/06\/P-Series-Strut-Channels.webp?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2026\/06\/P-Series-Strut-Channels.webp?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":9596,"url":"https:\/\/believeindustry.company\/ms\/post-punching-and-cutting-strut-channel-roll-forming-machine-video\/","url_meta":{"origin":24857,"position":4},"title":"Video Mesin Pembentuk Gulung Saluran Tebukan dan Potong Strut Selepas","author":"Darren Mao","date":"Disember 7, 2023","format":false,"excerpt":"Believe Industry Company ( Shanghai) has been manufactured a Post Punching and Cutting Strut Channel Roll Forming Machine for domestic market which consist of Uncoiler Roll Former( Feeder, Leveler, Roll Former, Puncher, and Cutter) Controller Hydraulic Station Collection Table https:\/\/videopress.com\/v\/5fbOiP3o?resizeToParent=true&cover=true&posterUrl=https%3A%2F%2Fbelieveindustry.company%2Fwp-content%2Fuploads%2F2023%2F12%2Fstrut-channel-machine-e1701935929778.jpg&preloadContent=metadata&useAverageColor=true View More>>","rel":"","context":"In &quot;Roll Forming Machine&quot;","block_context":{"text":"Roll Forming Machine","link":"https:\/\/believeindustry.company\/ms\/category\/roll-forming-machine\/"},"img":{"alt_text":"strut channel machine","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2023\/12\/strut-channel-machine-e1701935929778.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2023\/12\/strut-channel-machine-e1701935929778.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2023\/12\/strut-channel-machine-e1701935929778.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2023\/12\/strut-channel-machine-e1701935929778.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":20151,"url":"https:\/\/believeindustry.company\/ms\/strut-channel-roll-former-5-revolutionary-2026-updates\/","url_meta":{"origin":24857,"position":5},"title":"Pembentuk Gulungan Saluran Strut: 5 Kemas Kini Revolusioner 2026 untuk Pengeluaran Kuasa Tinggi","author":"Darren Mao","date":"Disember 23, 2025","format":false,"excerpt":"Pembentuk Gulungan Saluran Strut merupakan asas infrastruktur perindustrian, menghasilkan sistem sokongan penting untuk saluran elektrik, perpaipan dan susunan pelekap solar. Ketika kita menuju ke tahun 2026, permintaan untuk profil ini telah mencapai tahap tertinggi sepanjang masa, didorong oleh inisiatif tenaga boleh diperbaharui global dan pengembangan pusat data yang besar-besaran.\u2026","rel":"","context":"In &quot;Industry News&quot;","block_context":{"text":"Industry News","link":"https:\/\/believeindustry.company\/ms\/category\/industry-news\/"},"img":{"alt_text":"Advanced Strut Channel Roll Former with high-speed punching and auto-stacking.","src":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2025\/12\/Strut-Channel-Roll-Former-Machine-Line.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2025\/12\/Strut-Channel-Roll-Former-Machine-Line.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2025\/12\/Strut-Channel-Roll-Former-Machine-Line.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2025\/12\/Strut-Channel-Roll-Former-Machine-Line.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2025\/12\/Strut-Channel-Roll-Former-Machine-Line.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/believeindustry.company\/wp-content\/uploads\/2025\/12\/Strut-Channel-Roll-Former-Machine-Line.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]}],"jetpack_featured_media_url":"https:\/\/believeindustry.company\/wp-content\/uploads\/2026\/10\/strut-channel-roll-forming-machine-cost.webp","_links":{"self":[{"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/posts\/24857","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/comments?post=24857"}],"version-history":[{"count":8,"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/posts\/24857\/revisions"}],"predecessor-version":[{"id":24871,"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/posts\/24857\/revisions\/24871"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/media\/24861"}],"wp:attachment":[{"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/media?parent=24857"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/categories?post=24857"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/believeindustry.company\/ms\/wp-json\/wp\/v2\/tags?post=24857"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}