Believe Industry Company | Produsen, Pemasok & Eksportir Mesin Pembentuk Gulungan

Mesin Ubin Logam Berlapis Kaca

Grup Industri Percaya

Mesin Ubin Logam Berlapis Kaca

Metal Glazed Tile Machine is a whole automatic line to produce Glazed Tiles. The workers only need input the desired data( length, quantity, step length) on the touch screen.

Profile Drawings of Glazed Tiles

Glazed Tile Roll Forming Machine is a whole automatic line to produce Glazed Tiles. The workers only need input the desired data( length, quantity, step length) on the touch screen.

Type: 25-200 1000 steel tile
Type: 35-192
Type: 28-176
Type: 38-200

 Layout of Metal Glazed Tile Machine

The layout of Glazed Tile roll forming machine is uncoiling, Roll Forming , Punching Step, Cutting Off, Collecting

Technical Parameters of Metal Glazed Tile Machine

Mesin Pembuka Gulungan Hidraulik 5 Ton

Hydraulic expansion and electric uncoiling, whole automatically
  1. Unit pengumpanan dipisahkan secara mekanis dari bagian jalur produksi lainnya.
  2. Coil width:600-1250 mm
  3. I.D  of coil:  480 mm to 520 mm
  4. Maximal O.D:1200mm
  5. Berat kumparan maksimum: 5000 kg;
  6. Uncoiling speed: 0-15m/min adjustable
  7. Motor power: 5.5KW AC motor
  8. Daya hidrolik: 4 kW
  9. Kecepatan dikendalikan oleh konverter frekuensi merek: Yaskawa

Mesin Pembentuk Gulungan

  1. Machine Structure: Adopt H beam steel and wall panel welded, ASTM 1045 material
  2. Rollers Station: 18stations
  3. Shaft Diameter : 76mm
  4. Material of Shaft: High quality 45# Steel
  5. Rollers Material : 45# Steel, chroming of 0.05mm thickness
  6. Daya Motor Utama: 7,5 kW
  7. Power Transition: Chains and gears
  8. Speed Control: By frequency converter
  9. Forming Speed: 3-4m/min (exclude punching and cutting)
  10. Total weight: About 8.5 tons
Glazed Tile Roll forming Mill. Quality design and safety, the rollers surface is polished and chromed

Punch Steps  and Cutoff Unit

  1. The punches will be connected to a single hydraulic unit. This unit consists of tank, motor, pump, pressure control valves, pressure gauges, solenoid valves and hydraulic hoses. All of these are designed to operate safely at the required operating pressure.
  2. Material of the punches: Cr12,HRC 58-62, chrome coated
  3. Hydraulic power: 7.5kw
  4. Tekanan kerja: 12-16 MPa
  5. Punching Moulds: 1 group
  6. Cutting mould: 1 group
  7. We adopt the cutting device and punching mould in one device.
Punch and Cutting Unit for punch the sheet into tiles and then cut off the tiles into desired length

Hydraulic station

  1. Hydraulic Motor power: 7.5kw
  2. Tekanan kerja: 12-16 MPa
  3. Solenoid valve: Beijing Huade
  4. Oli hidrolik: Oli hidrolik 46#

Sistem Kontrol

  1. Pekerja memasukkan panjang dan jumlah produk melalui layar sentuh, total 20 kelompok, layar sentuh akan menampilkan status kerja mesin.
  2. Computer Control System: Panasonic PLC or Siemens
  3. Encoder: and limit switch: Omron brand
  4. Konverter Frekuensi: Yaskawa
  5. Layar Sentuh: MCSG
  6. Controlled System Power: Overload protection
  7. Voltage: 415, 50Hz, 3Phase

Percayalah pada Perusahaan Industri also have roll forming machines for ,  Floor Deck, Downspout, Rak Tegak. And also mesin pembentuk rol khusus is designed for special requirements.

View more for the introduction of metal tile roll forming machine.

 

 

Keluar dari versi seluler