บริษัท บีลีฟ อินดัสทรี | ผู้ผลิต ผู้จำหน่าย และผู้ส่งออกเครื่องรีดขึ้นรูป

เครื่องขึ้นรูปแผ่นพื้นโลหะ

กลุ่มอุตสาหกรรมเบลีฟ

Floor Deck Roll Forming Machine is used to produce steel floor decks automatcally

Metal Floor Deck Roll Forming Machine is designed and manufactured for producing steel floor decking for steel buildings.

Profile Drawing

metal decking floor
New deisgn floor deck exceptionally resistant to compressive buckling resulting in superior span capability compared to traditional decks.
Highly strong re-entrant compositate floor deck
Normal design metal floor deck is invented in 1970s, and also widely used now
deep profile shape provides a very efficient metal deck and composite slab, with a low usage of concrete. Slimflor systems have wider lower flange steel beams that allow the deck to land on the bottom flange.

Material Details of Metal Floor Deck

Metal floor decks primarily use hot-dip galvanized steel (Q235/A36, 120–275g/m² zinc coating) — cost-effective, high-strength (235–355MPa yield). Alternatives: galvalume (superior corrosion/heat resistance), aluminum (3003/5052, lightweight), stainless steel (304/316 for harsh environments). Thickness: 0.8–2.0mm (1.0–1.5mm common). Embossed surfaces enhance concrete bond for composite systems, tailored to structural and environmental needs.
 

Layout of Metal Floor Deck Roll Forming Machine

Uncoiling--Feeding and Guiding-- Roll Forming ---Cutting --Collecting

Technical Parameters of Metal Floor Deck Roll Forming Machine

Hydraulic  Uncoiler with Coil Car

  • การคลายด้วยไฟฟ้า การคลายและการดึงด้วยระบบไฮดรอลิก
  • Maximum capacity:11 Ton
  • D: 508 มม. O.D: 1350 มม.
  • Maximum width:1350mm，
  • Hydraulic Power: 5.5KW, Uncoiling motor power:5.5KW

 เครื่องขึ้นรูปม้วน

  • Adopt H STEEL and Steel Plate Welded, side wall thickness: 25mm, 450mm H steel
  • Rollers Station: 30, with several auxiliary rollers
  • Diameter of Shaft: 100mm
  • Material Of Shaft: 45# Steel With Heat Treatment HRC50~55
  • Material Of Roller: GCR 15(ASRM a295:1998) Steel With Quenching Treatment and Chroming of 0.05mm Thickness
  • Motor Power: 15KW*2
  • Power Transition: by Gears&Chains( 2 inch single)
  • การควบคุมความเร็ว: โดยใช้อินเวอร์เตอร์ความถี่
  • Speed of the machine: 10-15m/min

อุปกรณ์ตัดไฮดรอลิก

  • Material Of Cutting Mold: Cr12 Steel With Quenched Treatment HRC 60-62
  • Cutting Length And Quantity: Clients Can Set The Length and Quantity on the PLC Touch Screen
  • Hydraulic Station Power: 5KW
  • Tolerance Of Cutting Length: +/-2mm

ระบบควบคุม

  • The worker input the length and quantity of the product through touch screen, total 20 groups, the touch screen will show the working status of the machine,
  • PLC Control Box: 700mmx1000mmx300mm
  • Computer Control System: Mitsubishi PLC
  • Frequency inverter: Mitsubishi
  • ตัวเข้ารหัส: ยี่ห้อ Omron
  • Limit switch: Omron
  • ระบบควบคุมกำลังไฟ: การป้องกันการโอเวอร์โหลด
  • แรงดันของสถานีไฮดรอลิก: ≧12Mpa
  • Current: 415 V Direct Current, 50Hz, 3 Phase

ตารางการเก็บรวบรวม

Collect the product after cutting, Angle Steel Welded, rollers chromed

บทสรุป

The metal floor deck roll forming machine is an indispensable industrial solution for modern steel-framed construction. It delivers efficient, precise production of high-integrity floor deck profiles—compatible with galvanized steel, aluminum, and specialty materials—ensuring consistent dimensions and structural reliability. By streamlining prefabrication, it boosts on-site efficiency, supports composite concrete bonding, and adapts to diverse project needs (residential, industrial, commercial). A cost-effective, high-performance tool that underpins durable, fast-track building projects. ติดต่อเราวันนี้ to customize your machine for specific deck profiles, capacity, and budget, and elevate your construction production efficiency.

ออกจากเวอร์ชันมือถือ