Çelik Zemin Kaplama Rulo Şekillendirme Makinesi

Çelik Zemin Kaplama Rulo Şekillendirme Makinesi

Steel Floor Deck Roll Forming Machine is designed and manufactured for producing steel floor decking for steel buildings.

PROFILE DRAWING

 

composite floor deck
Highly strong re-entrant composite floor deck
Classic floor deck
Normal design Steel Floor Deck is invented in 1970s, and also widely used now
deep floor deck
deep profile shape provides a very efficient metal deck and composite slab, with a low usage of concrete. Slimflor systems have wider lower flange steel beams that allow the deck to land on the bottom flange.
metal decking floor
New design floor deck exceptionally resistant to compressive buckling resulting in superior span capability compared to traditional decks.

Material Information：

  • Coil Material: Galvanizedcoil, 235-500MPA
  • Coil Material Thickness: 0.6-1.5MM

Process Of The Production Line

Metal Floor Deck Roll Forming Machine Supplier
Steel Floor Deck Roll Forming Machine process is Uncoiling– Roll Forming —Cutting –collecting

Parameters For The Required Roll Forming Machine Line

Hydraulic  Uncoiler with Coil Car

  • Elektrikli açma, hidrolik gevşetme ve gerdirme
  • Maximum capacity:11 Ton
  • D：508mmO.D：1350mm
  • Maximum width:1350mm，
  • Hydraulic Power: 5.5KW, Uncoiling motor power:5.5KW
Otomatik Hidrolik Bobin Açıcı
Hydraulic expansion and electric uncoiling 

 Rulo Şekillendirme Makinesi

  • Adopt H STEEL and Steel Plate Welded, side wall thickness: 25mm, 450mm H steel
  • Rollers Station: 30-36 , with several auxiliary rollers
  • Diameter of Shaft: 110mm
  • Material Of Shaft: 45# Steel With Heat Treatment HRC50~55
  • Material Of Roller: GCR 15(ASRM a295:1998) Steel With Quenching Treatment and Chroming of 0.05mm Thickness
  • Motor Power: 22KW*2
  • Power Transition: by Gears&Chains( 2 inch single)
  • Hız Kontrolü: Frekans İnvertörü ile
  • Speed of the machine: 10-15m/min
Zemin Kaplama Rulo Şekillendirme Makinesi
Floor Deck Roll Forming Mill, Steel Plate structure

Hidrolik Kesme Cihazı

  • Material Of Cutting Mold: Cr12 Steel With Quenched Treatment HRC 60-62
  • Cutting Length And Quantity: Clients Can Set The Length and Quantity on the PLC Touch Screen
  • Hydraulic Station Power: 5KW
  • Tolerance Of Cutting Length: +/-2mm

Kontrol Sistemi

  • The worker input the length and quantity of the product through touch screen, total 20 groups, the touch screen will show the working status of the machine,
  • PLC Control Box: 700mmx1000mmx300mm
  • Computer Control System: Mitsubishi PLC
  • Frequency inverter: Mitsubishi
  • Kodlayıcı: Omron Markası
  • Limit switch: Omron
  • Kontrollü Sistem Gücü: Aşırı Yük Koruması
  • Hidrolik İstasyonun Basıncı: ≧12 MPa
  • Current: 415 V Direct Current, 50Hz, 3 Phase

Koleksiyon Tablosu

Collect the product after cutting, Angle Steel Welded, rollers chromed

Believe Industry Company have series types of Steel Floor Deck roll forming machine, and we also accept customized profile. Daha fazlasını görüntüle.

 

Ağırlık 10000 kilogram
Boyutlar 16000 × 1500 × 1500 mm

İlgili ürünler

Fiyat Teklifi İsteyin

İletişim Formu Demosu

İçindekiler