Alamat
No 1, Jalan Yd, Distrik Huishan, Kota Wuxi, Jiangsu. 214183
Jam Kerja
Senin sampai Jumat: 09.00 - 17.00
Sabtu: 09.00 - 16.00
A Metal Embossing Machine Line is a metal forming process unit that emboss a series of straight or parallel ridges onto a metal sheet or strip. Metal Embossing Machine Line A Metal coil embossing line is a stamping process to produce various…
Spacers and Shims are part of Roll Forming Mills( Roll Forming Machine Part). The total length of the rollers, shims, spaces are equal to the length of the roller space(inner width of the roll forming stand)
Cold Roll Former Cutting Position As we know that, a continuous cold roll former( cold roll forming machine) is a whole line with the cutoff die. The Coil strips move continuously during the roll forming production. Only if you use…
The Rotary Punching Machine is a fast tool that cuts holes into moving sheet metal. It never stops the metal from moving. So, it works very fast. This machine uses spinning wheels to cut exact shapes. Consequently, it is great…
To eliminate the deformation by the internal stress which is created by the roll forming press. A straightener is generated. Usually, wide building sheets remain straight after roll forming. but most narrow steel profiles and especially asymmetrically roll formed steel profile will required a straightener.
Roll Forming Mill Side Roll The History of Side Rolls In the early applications, Roll Forming Machine is based on the mail roll forming rollers. And if the output product is unsatisfied, then the designer will add some side roll…
The roll forming machine transmission is the core mechanical system responsible for transferring power from the motor to the roller shafts. Specifically, this drive system determines the operational speed, precision, and the overall torque required to shape heavy-duty metal coils.
In most cases, the drive-side stands are exposed to considerable forces and bending moments. The operator-side (outboard) stands are exposed to lesser forces. They usually support the shafts through bearings and bearing blocks. As a result, there are no forces acting on the roll forming stand in the axial direction of the shaft. The vertical forces are contained by the vertical legs of the stands.
Mill Base Most Important Requirements for Mill Base The mill base, sometimes called “ bed ” supports the stands, shafts, rolls, drive train, and the components needed to form the sections. The most important requirements for the base are: Rigidity…