Mesin Pembentuk Gulungan Ubin

Tile Roll Forming Machine is a whole automatic line to produce Tiles. The workers only need input the desired data( length, quantity, step length) on the touch screen.

Profile Drawings of Tiles

25-200-1000
35-192-960
28-176-704
38-200-1000

 Layout of Tile Roll Forming Machine

Technical Parameters of Tile Roll Forming Machine

Mesin Pembuka Gulungan Hidraulik 5 Ton

1. Unit pengumpanan dipisahkan secara mekanis dari bagian jalur produksi lainnya.
2. Steel coil width:600-1250 mm
3. Internal diameter of coil:  480 mm to 560 mm
4. Maximal out diameter:1200mm
5. Berat kumparan maksimum: 5000 kg;
6. Kecepatan kerja: 0-15 m/menit (dapat disesuaikan)
7. Daya motor utama: Motor AC 5,5KW
8. Daya hidrolik: 4 kW
9. Kecepatan dikendalikan oleh konverter frekuensi merek: Yaskawa

Mesin Pembentuk Gulungan

1. Structure: Adopt H beam steel and wall panel welded
2. Rollers Station: 16 stations
3. Diameter of Shaft: 75mm
4. Material of Shaft: High quality 45# Steel
5. Material of Rollers: 45# Steel, chroming of 0.05mm thickness
6. Motor Power: 7.5kw
7. Power Transition: Chain and gear
8. Speed Control: By frequency converter
9. Forming Speed: 3-4m/min (exclude punching and cutting)
10. Total weight: About8.5 tons

Punch Steps  and Cutoff Unit

1. The punches will be connected to a single hydraulic unit. This unit consists of tank, motor, pump, pressure control valves, pressure gauges, solenoid valves and hydraulic hoses. All of these are designed to operate safely at the required operating pressure.
2. Material of the punches: Cr12,HRC 58-62, chrome coated
3. Hydraulic power: 7.5kw
4. Tekanan kerja: 12-16 MPa
5. Punching Moulds: 1 group
6. Cutting mould: 1 group
7. We adopt the cutting device and punching mould in one device.

Hydraulic station

1. Hydraulic power: 7.5kw
2. Working pressure: 12-16 Mpa adjustable
3. Solenoid valve: Beijing Huade
4. Oli hidrolik: Oli hidrolik 46#

Sistem Kontrol

1. Pekerja memasukkan panjang dan jumlah produk melalui layar sentuh, total 20 kelompok, layar sentuh akan menampilkan status kerja mesin.
2. Sistem Kontrol Komputer: PLC Panasonic
3. Encoder: Omron brand
4. Konverter Frekuensi: Yaskawa
5. Layar Sentuh: MCSG
6. PLC Brand: Panasonic brand
7. Controlled System Power: Overloadprotection
8. Voltage: 380V, 50Hz, 3Phase

Percayalah pada Perusahaan Industri also have roll forming machines for Lembaran Atap,  Floor Deck, Downspout, And also mesin pembentuk rol khusus is designed for special requirements.