SATIŞ
Beli tarafından üretilen, tamamen otomatikleştirilmiş metal çatı kaplama rulo şekillendirme makinesi üretim hattı.
Automatic decoiler for metal roof deck roll forming machine production line.
Precision guiding and feeding unit of a metal roof deck roll forming machine.
Heavy-duty rollers and stations of the metal roof deck roll forming machine.
Post-cutting hydraulic shear for metal roof deck roll forming machine.
High-strength steel decking profile produced by metal roof deck roll forming machine.
Beli tarafından üretilen, tamamen otomatikleştirilmiş metal çatı kaplama rulo şekillendirme makinesi üretim hattı.
Automatic decoiler for metal roof deck roll forming machine production line.
Precision guiding and feeding unit of a metal roof deck roll forming machine.
Heavy-duty rollers and stations of the metal roof deck roll forming machine.
Post-cutting hydraulic shear for metal roof deck roll forming machine.
High-strength steel decking profile produced by metal roof deck roll forming machine.

Metal Çatı Kaplama Rulo Şekillendirme Makinesi

Metal roof deck roll forming machine is for producing metal/steel/aluminum roof decks as per requirements.

 

Metal Çatı Kaplama Rulo Şekillendirme Makinesi

What’s Metal Roof Deck?

Metal deck is a cold formed corrugated steel sheet supported by steel joists or beams. It is used to support concrete or insulating membrane of a roof. It was developed to provide a structurally efficient product for use in roof and floor systems.

Roof deck products are typically used as the structural component of many flat, pitched, or arched roof systems because of their benefits with regards to strength, weight, and economy. It is commonly attached to open web steel joists, structural steel, or light gauge framing.

Metal Roof Deck Types

Believe Industry Company have manufactured more than 20 designs of metal roof decks to over than 10 countries. Some are standard and some are customized. Below some types for reference only.

Metal Roof Deck D32Metal Roof Deck D35Metal Roof Deck D46Metal Roof Deck D60

Metal Roof Deck Roll Forming Machine Components

  1. Hidrolik Bobin Açıcı
  2. Ana Rulo Şekillendirme Makinesi
  3. Kesme Ünitesi
  4. Otomatik İstifleyici
  5. Kontrol Kutusu
  6. Hydraulic Stations

Machine Layout

metal roof deck roll forming machine layout

Brief Introduction of the metal roof deck machine

Raw Material

  1. Material: PPGI, GI, PPGL, GL, ALGI, Stainless
  2. Thickness: 0.18-0.8mm
  3. Coil Width: 760 mm,  914 mm, 1000 mm, 1200 mm, 1250 mm.

Line Specifications

  1. Whole Line Speed: 15-20 m/min, can be up to 40 m/min.
  2. Total Power:  14.5 KW, 3 KW for uncoiling, 7.5 KW for roll forming and 4 KW for cutting.
  3. Controlled System: PLC and HMI.

Machine Specifications

  1. Uncoiler Capacity: 5 Ton, 8 Ton or 10 Ton.
  2. Rollers Material: ASTM 1045, surface chromed 0.05 mm and hardness treatment.
  3. Shaft Material: ASTM 1045, diameter 75 mm, hardness treatment.
  4. Driven Method: Gear and Chain.
  5. Roof Deck Machine Structure: H beam welded as bottom bed. chromed pillar as roll forming stands

View More information>>: Çatı Sac Rulo Şekillendirme Makinesi

Believe Industry Company have a full range of roll forming machines for roof decks:

  1. IBR Sheet
  2. Corrugated Sheet
  3. Spandeck
  4. Cliplok

Bize Ulaşın Daha fazla bilgi için.

 

 

 

İlgili ürünler

Fiyat Teklifi İsteyin

İletişim Formu Demosu

İçindekiler