Mesin Pembentuk Rol Talang Air

Mesin Pembentuk Rol Talang Air is for producing rectangular or round downpipes, which is always equipped with a elbow machine.

Mesin Pembentuk Rol Talang Air

What’s downspout?

A downspout is also named as waterspout, downpipe, drain spout, roof drain pipe, or sone. Which is a pipe for carrying rainwater from the gutter.

The downspouts are usually vertical and extend down to the ground. The rainwater is directed away from the building’s foundation, to protect it from water damage. 

The material of the downspout are usually PPGI, GI, Copper, Aluminum, etc.

Machine Components of Downspout Machine

  1. 3 Ton electric uncoiler
  2. Mesin Pembentuk Rol
  3. Pelurus rambut
  4. Unit Pemutus
  5. Panel Kontrol
  6. Tabel Koleksi
  7. Stasiun Hidrolik
  8. Elbow Machine( Optional)

Technical Parameters of Downspout Roll Forming Machine

3 Ton electric decoiler

  1. Capacity: Max 3 Ton
  2. Motor Power: 2.2KW
  3. Inner Diameter of the coil: 450-600mm
  4. Outer Diameter of the coil: Max 1500mm
  5. Manual Loosen and Tension. 

Mesin Pembentuk Rol

  1. Machine Base: 350 H steel welded
  2. Machine structure: Chrome Pillar
  3. Roller Material: ASTM 1045, chromed 0.05mm
  4. Shaft Diameter: 70mm
  5. Daya Motor: 7,5KW
  6. Downspout Machine Speed: 8-10m/min
  7. Forming Steps: 18

Unit Pemutus

  1. Jenis Pemotongan: Pemotongan hidrolik, bagian pembentuk gulungan berhenti saat pemotongan
  2. Daya Motor Hidrolik: 4KW
  3. Tekanan Kerja Hidraulik: 12-16 MPa
  4. Bahan Mata Pisau Pemotong: Cr12 dengan perlakuan panas
  5. Pengukuran panjang: Pengukur panjang dengan encoder otomatis (merek Omron)
  6. Toleransi Panjang: ±1,0 mm

Panel Kontrol

  1. Tegangan dan Frekuensi: 415V, 50Hz, 3 Fase
  2. Panel Kontrol: Layar sentuh dengan sakelar tipe tombol.
  3. Satuan Panjang: Milimeter (diaktifkan pada panel kontrol)
  4. Merek PLC: Panasonic
  5. Frequency Converter Brand: Yaskawa
  6. Merek Encoder: Omron
  7. Touch Screen Brand: Siemens
  8. Kami menggunakan konektor penerbangan agar pelanggan mudah menyambungkan kabel.
  9. Anda dapat mengatur panjang dan jumlah potongan pada layar sentuh. Mesin akan berhenti secara otomatis setelah program pemotongan selesai.

Elbow Machine (Optional)

  1. Max bend angle: 90 degree
  2. Function: bend and fasten at the same time
  3. Electric Power: 2.2KW
elbow machine

Percayalah pada Perusahaan Industri also have one body downspout roll forming machine which can produce the pipes and elbow in one machine. Hubungi kami untuk informasi lebih lanjut.

Permintaan Penawaran

Daftar isi