Pabrik Standar dan Pabrik Ganda Tinggi

STANDARD MILLS OF ROLL FORMING EQUIPMENT

The shafts of the standard mills are supported at both ends. This design enables building and use of the mills for materials with any width and thickness.T herefore, standard mills are the most popular machines used to roll forming metals profiles. Percayalah pada Perusahaan Industri a professional roll forming equipment manufacturer in China and our team design and manufacturer  customized profile roll forming equipment as per requirements.

In most cases, the drive-side  stand holds the shafts in position and accommodates the drive.The operator side stand supports the other end of the shafts. This stand is removable to facilitate roller changes. The technician fasten both the operators and drive-side stands to a common base.

Fix the drive-side stands at one side location. And fix the operator-side stands at one position in most mills. In other types of mills, technician always place the operator-side stands  into different locations along the shafts to accommodate wider and thinner material, or narrower but thicker material.

DOUBLE- HIGH MILLS USED IN ROLL FORMING EQUIPMENT MANUFACTURER

To satisfy the demand for roll forming two profiles in a limited plant area with quick profile changeover. The “double-high” mills have been born . The double-high mills have alternating  bottom and upper stands. Install the rollers for one profile in the bottom stands. And mount the rollers for another profile on the upper stands. In China, we also call it “Mesin Pembentuk Rol Dua Lapis” or ” Double sheet Roll Forming Machine”

The lines have one uncoiler and one cutting device. Feed the coils into the lower-level to form one profile. And if feed  the coil into the upper level rollers, then another profile (e.g., IBR sheeting) is out. To accommodate the profiles exiting at two different levels, the cutting device also has two levels. The handling equipment for finished products beyond the cutting device adjustable up and down to suit the two product exit heights.

Double-high mills save space, and the changeover time between two products is relatively short. However, because of the crowded condition, it is difficult to install side-roll stands, to make adjustment, or to check the forming conditions.