Steel Slitting Machine Line

Percayalah pada Perusahaan Industri have a full range of steel slitting machine line for a different requirements. Hubungi kami Sekarang untuk informasi lebih lanjut.

Steel Slitting Machine Line

• 

• 

• 

• 

What’s Slitting Machine Line?

Slitting is the operation of cutting a wide strip into a number of narrow strips by passing the strip between circular cutters or blades. Slitting lines consist of an uncoiler for holding the wide coil, one or more slitters, and a coiler for simultaneous recoiling of all the slit strips. 

Suitable Coil Material

1. Stainless Steel Coil
2. Galvanized Coil
3. Galvalume Coil
4. Prepainted Galvanised Steel
5. Prepainted Galvanlume Steel
6. Aluminium Coil
7. Copper coil
8. Low Carbon Steel Coil
9. Silicon Steel Coil 

Mother Coil Data

1. Thickness Range: 0.2-2.0mm
2. Width: 400-1600mm
3. Coil Weight: Max 20 Ton
4. I.D of Coil: 508-610mm
5. O.D of Coil: Max 2000mm

Son Coil Data

1. Slitted Width: 20mm Min
2. Width precision: 0.05mm
3. Slitting Bur: 0.05mm minimum
4. Recoiling Looseness: less than 2mm
5. Slitting Number: 25 Pcs Max

Slitting Line Specifications

Komponen Mesin

1. Loading Coil Car
2. Pembuka gulungan
3. Straightener device(optional)
4. Head Shear /Pinch roll/(optional)/Film Device(optional)
5. Bridge/Loop pit
6. Side guide
7. Pengiris
8. Side Guide & scrap winder
9. Bridge /Loop pit
10. Separator &Tension station
11. Recoiler  and Support Arm
12. Unloading coil car
13. Sistem hidrolik
14. Pneumatic System
15. 15.Electronic Controller( PLC  ,Control Table)

Layout of Slitting Line

Brief Introduction of Slitting Machine Components

1: Coil Car

Loading coil into decoiler’s arm. moving in rails,  lift  up and down power from cylinder, v type saddle.

2: Hydraulic Decoiler

 Hold coil and open it ,feeding to next step.

1. Drum up shrink range:  465-30 to 520 mm
2. Drum increases and the hydraulic cylinder ROBFA – 200 * 100
3. Spindle is made of 40 cr solid round steel by rough turning, conditioning

3: Pinch Roll

The pinch roll is for pinching the head into loop bridge.

4: Loop Bridge 1

Keep enough Coil in pit loop so the line can work well, and make each part’s speed in little difference.

5: Main Slitter

Memotong lembaran gulungan menjadi potongan-potongan. Mesin ini terdiri dari alas baja utama, dua penyangga, poros pemotong, mata pisau pemotong, dan silinder hidrolik. Mendorong salah satu penyangga secara hidrolik membuat penggantian mata pisau pemotong menjadi mudah dan cepat.

6: penggulung besi tua

Scrap winder is a very economical device for slit scraps. There are two types of scrap winder. One is winder set on sides of the conveying table. Another is set on two sides of the line.Separator &Tension station

7: Separator &Tension station

It include separator shaft and separator disc. And will ensure the strips smoothly going into the tension station. The tension roller press tightly for perfect recoiling

8: Recoiler and Support Arm

Mesin penggulung ulang terdiri dari alas baja, lengan penyangga, poros penggulung ulang, dan lengan penekan. Poros lengan penekan ini dirakit dengan cakram pemisah yang secara hidraulik mengikuti material selama penggulungan ulang untuk memastikan strip tergulung lurus.

Percayalah pada Perusahaan Industri memiliki rangkaian lengkap garis belah for different requirements. Contact us for more inforamtion.