Steel Slitting Machine Line

Believe Industry Company have a full range of steel slitting machine line for a different requirements. Bize Ulaşın Şimdi daha fazla bilgi için.

Steel Slitting Machine Line

What’s Slitting Machine Line?

Slitting is the operation of cutting a wide strip into a number of narrow strips by passing the strip between circular cutters or blades. Slitting lines consist of an uncoiler for holding the wide coil, one or more slitters, and a coiler for simultaneous recoiling of all the slit strips.

Suitable Coil Material

Stainless Steel Coil
Galvanized Coil
Galvalume Coil
Prepainted Galvanised Steel
Prepainted Galvanlume Steel
Aluminium Coil
Copper coil
Low Carbon Steel Coil
Silicon Steel Coil

Mother Coil Data

Thickness Range: 0.2-2.0mm
Width: 400-1600mm
Coil Weight: Max 20 Ton
I.D of Coil: 508-610mm
O.D of Coil: Max 2000mm

Son Coil Data

Slitted Width: 20mm Min
Width precision: 0.05mm
Slitting Bur: 0.05mm minimum
Recoiling Looseness: less than 2mm
Slitting Number: 25 Pcs Max

Slitting Line Specifications

Makine Bileşenleri

Loading Coil Car
Dekoiler
Straightener device(optional)
Head Shear /Pinch roll/(optional)/Film Device(optional)
Bridge/Loop pit
Side guide
Slitter
Side Guide & scrap winder
Bridge /Loop pit
Separator &Tension station
Recoiler and Support Arm
Unloading coil car
Hidrolik sistem
Pneumatic System
15.Electronic Controller( PLC ,Control Table)

Layout of Slitting Line

Brief Introduction of Slitting Machine Components

1: Coil Car

Loading coil into decoiler’s arm. moving in rails, lift up and down power from cylinder, v type saddle.

2: Hydraulic Decoiler

Hold coil and open it ,feeding to next step.

Drum up shrink range: 465-30 to 520 mm
Drum increases and the hydraulic cylinder ROBFA – 200 * 100
Spindle is made of 40 cr solid round steel by rough turning, conditioning

3: Pinch Roll

The pinch roll is for pinching the head into loop bridge.

4: Loop Bridge 1

Keep enough Coil in pit loop so the line can work well, and make each part’s speed in little difference.

5: Main Slitter

Rulo halindeki sacı şeritler halinde keser. Ana çelik taban, iki destek ayağı, kesme mili, kesme bıçakları ve hidrolik silindirlerden oluşur. Destek ayaklarından birinin hidrolik olarak itilmesi, kesme bıçaklarının değiştirilmesini kolay ve hızlı hale getirir.

6: Hurda sarıcı

Scrap winder is a very economical device for slit scraps. There are two types of scrap winder. One is winder set on sides of the conveying table. Another is set on two sides of the line.Separator &Tension station

7: Separator &Tension station

It include separator shaft and separator disc. And will ensure the strips smoothly going into the tension station. The tension roller press tightly for perfect recoiling

8: Recoiler and Support Arm

Geri sarma makinesi çelik taban, destek kolu, geri sarma mili ve pres kolundan oluşur. Bu pres kolu mili, geri sarma sırasında malzemeyi hidrolik olarak takip eden ayırıcı disklerle birleştirilmiştir ve bu sayede şeritlerin düzgün bir şekilde geri sarılması sağlanır.