Light Gauge Slitting Line

Light Gauge Slitting Line, which is used to slitting the coils/rolls(Thickness is 0.2-4mm, width: 500-2000mm, weight is 55-25 Ton) into desired narrow coils/rolls,

Light Gauge Slitting Line

Usually, light gauge slitting line is high precision and speed is up to 120m/min or more. this line widely used in steel roofing factory, light steel structure frame house factory. also steel pipe factory. เบลี® is engaged to design and manufacturer full range เส้นตัด for all the demands.

What’s the types of light gauge slitting line machine?

Model	Thickness(mm)	Coil Width(mm)	Slitting No.	Speed(m/min)	Coil Weight(ton)
BELI-1*1000	0.3-2	150-1000	10-30	0-120	5-10
BELI-2*1300	0.3-2	500-1300	10-30	0-120	10-15
BELI-2*1600	0.3-2	600-1600	10-30	0-120	15-20
BELI-3*1600	0.4-3	600-1600	8-30	0-120	15-20
BELI-4*1600	0.5-4	600-1600	6-25	0-120	15-20
BELI-4*2000	0.5-4	600-2000	6-25	0-100	15-25

Machine Components of Light Gauge Slitting Line machine

Coil loading car
Hydraulic decoiler
Coil entry leading, pressing and shoveling device
Pinch roll feeding and 5-roller straightening device(customized)
Conveying roller table(customized)
Guiding device
Slitting device
Scrap winding device
Looping pit bridge table
Strips pre-dividing and 5-roller straightening and tension device
Dividing and recoiling device
Coil unloading car
Hydraulic system
Electric system

คำถามที่พบบ่อย

Q: If i want to buy a slitting line, what’s the information you need know from us?

A: The material details of the mother coil/roll, such as: Thickness, strength, material( HR, CR, SS, PPGI, Gi, etc), width, sliiting number, the min.width of the strips you want to slit.

Q: After I purchase the line, when i will have the layout?

A: Within 2 weeks, and we will confirm with you about the layout, but first you should share your factory floor drawing, electric supply, air supply details.

Q: How long the manufacturing time?

A: 120 days after receive the deposit

Q: Is it possible to have a line for the thickness from 0.2-6mm?

A: Impossible, and not recommended, we design the line according to the big demand, all the m/c are refer to the big one, such as” 0.2-6″, the line slit the 6mm thickness is ok, but while slit the 0.2mm thickness, the precision would be perfect as expected.

← กลับ