ÇELİK SAPLAMA RULO ŞEKİLLENDİRME MAKİNESİ

Çelik Saplama Rulo Şekillendirme Makinesi is for produce steel studs for wall and roof as desired profiles. The machine can produce various sizes of steel studs.

Çelik Saplama Rulo Şekillendirme Makinesi

Believe Industry Company is engaged in design and manufacture a full range of rulo şekillendirme makineleri for steel studs and tracks. We have different design of roll formers for the machine for different requirements.

What’s Steel Studs and Manufacturing equipment?

A steel stud is a vertical frame member in building’s wall of small cross section than a post. They are a fundamental element in frame building.

In the past, studs are made of wood. But the wood need dry when used or problems may occur as the studs shrink and twist as they dry out. So steel studs are gaining popularity, especially for firewalls.

Now the factories purchase Steel Stud Roll Forming Machine for producing the steel studs, for the different production capacity, Believe Industry have below design of the steel studs roll former:

1. Single Profile Roll Forming Machine
2. Muti-Profile Roll Forming Machine
3. Duplex Roll Forming Machine
4. Manual adjust roll forming machine for muti-profile

Bize Ulaşın Daha fazla bilgi için.

Main Machine Components and Technical Specifications

The Layout of Steel Stud Roll Forming Machine

3 Tonluk Elektrikli Bobin Açıcı

Öğe	Tanım
İşlev	Support the coil strips and electric uncoiling the coil into the roll forming mill
Kapasite	3 Ton
Inner Diameter of the coil	480-600
Out Diameter of the coil	1500mm Max
Motor Gücünü Açma	1.5KW

Steel Stud Roll Forming Mill

Öğe	Tanım
İşlev	Roll forming the steel  strips into profile with the desired length
Yapı	Adopt Box Beam as the main base, guide pole type as the stands
Roll Station	16 steps
Şaft Malzemesi	ASTM 1045, 80mm diameter
Spacer Material	ASTM, surface chromed, wall thickness is 8mm
Silindir Malzemesi	GCR15, fine machining, surface chromed 0.05mm thickness
Driven Motor Power	7,5 kW
Roll Forming Speed	15 m/dak
Yönlendirilmiş Yöntem	Chain and gear

Hidrolik Kesme Cihazı

Öğe	Tanım
İşlev	Cut the steel studs into desired lengths, which is set by the controlled box
Kesme Kalıbı Malzemesi	CR12, HRC 60-62 °
Hidrolik Motor Gücü	4 kW
Hydraulic Working Presure	12-16 MPA
Uzunluk Ölçümü	Omron kodlayıcı

Kontrol Kutusu

Öğe	Tanım
İşlev	The worker set the required data on the touch screen and it will display the status, and the machine will be automatic run.
Voltage Supply	380V, 50HZ, 3 phase ( customized)
Dokunmatik Ekran	MCGS or Siemens
PLC	Panasonic veya Siemens
Kodlayıcı	Omron kodlayıcı
Frequency Inverter	Yaskava

Fotoğraf Galerisi