Hafif Ölçülü Dilme Hattı

Hafif Ölçülü Dilme Hattı, which is used to slitting the coils/rolls(Thickness is 0.2-4mm, width: 500-2000mm, weight is 55-25 Ton) into desired narrow coils/rolls,

Hafif Ölçülü Dilme Hattı

Usually, light gauge slitting line is high precision and speed is up to 120m/min or more. this line widely used in steel roofing factory, light steel structure frame house factory. also steel pipe factory. BELI® is engaged to design and manufacturer full range kesme çizgisi for all the demands.

What’s the types of light gauge slitting line machine?

Model	Kalınlık (mm)	Bobin Genişliği (mm)	Kesme No.	Hız (m/dak)	Bobin Ağırlığı (ton)
BELI-1*1000	0.3-2	150-1000	10-30	0-120	5-10
BELI-2*1300	0.3-2	500-1300	10-30	0-120	10-15
BELI-2*1600	0.3-2	600-1600	10-30	0-120	15-20
BELI-3*1600	0.4-3	600-1600	8-30	0-120	15-20
BELI-4*1600	0.5-4	600-1600	6-25	0-120	15-20
BELİ-4*2000	0.5-4	600-2000	6-25	0-100	15-25

Machine Components of Light Gauge Slitting Line machine

Coil loading car
Hydraulic decoiler
Coil entry leading, pressing and shoveling device
Pinch roll feeding and 5-roller straightening device(customized)
Conveying roller table(customized)
Yönlendirme cihazı
Kesme cihazı
Scrap winding device
Looping pit bridge table
Strips pre-dividing and 5-roller straightening and tension device
Dividing and recoiling device
Coil unloading car
Hidrolik sistem
Electric system

SSS

Q: If i want to buy a slitting line, what’s the information you need know from us?

A: The material details of the mother coil/roll, such as: Thickness, strength, material( HR, CR, SS, PPGI, Gi, etc), width, sliiting number, the min.width of the strips you want to slit.

Q: After I purchase the line, when i will have the layout?

A: Within 2 weeks, and we will confirm with you about the layout, but first you should share your factory floor drawing, electric supply, air supply details.

Q: How long the manufacturing time?

A: 120 days after receive the deposit

Q: Is it possible to have a line for the thickness from 0.2-6mm?

A: Impossible, and not recommended, we design the line according to the big demand, all the m/c are refer to the big one, such as” 0.2-6″, the line slit the 6mm thickness is ok, but while slit the 0.2mm thickness, the precision would be perfect as expected.

← Geri