Address
No. 1 Yudong Road, Huishan District, Wuxi City, Jiangsu. 214103
Work Hours
Monday to Friday: 9AM - 5PM
Saturday: 9AM - 4PM
To identify pallet rack upright, start where the beam meets the column. That connection is the fingerprint. Look at the hole shape, measure the distance between hole centers, then check the beam connector and its locking device. Color is a useful clue but never proof.
Six checks cover almost every system in North America. When you identify pallet rack upright columns this way, record the slot shape, the hole spacing, the pin shape, the lock type, the paint and any maker mark. Those six facts let you identify pallet rack upright precisely enough to order a matching beam. Getting it wrong is not just an inconvenience. Beams from different systems will not seat, and a beam that hangs loose is a safety problem.
The checks below come from rack lines our engineers have built for buyers in more than 50 countries since 2005, and from the identification practice described by MHI, Total Warehouse and Quality Material Handling. If you want the naming background first, our pallet rack upright profile names guide explains where each style name came from. This page stays with the hands-on job of figuring out what is standing in your building.
Every method to identify pallet rack upright begins at the same place: the joint where a load beam locks into a column. To identify pallet rack upright correctly, read that joint first. That joint falls into one of three families, and the family narrows your choices immediately.
Take a photo of one connection straight on before you touch anything. A clear shot makes it easier to identify pallet rack upright later. A good photo shows the upright face, the beam end and the locking clip in one frame. It is much easier to identify pallet rack upright from that image than from memory after you walk back to the office.
Work through these in order to identify pallet rack upright styles. Each one removes a group of possibilities, and by check four you usually have the answer.
| Step | What to check | What it tells you |
|---|---|---|
| 1 | Connection family | Pin and slot, hook and slot, or bolted |
| 2 | Hole and slot shape | Teardrop, rectangular, mushroom, trapezoidal or round |
| 3 | Hole spacing center to center | 2 in, 3 in, 4 in, or variable |
| 4 | Beam connector and lock | Round pins, mushroom pins, hooks, J-clip, spring lock, bolt |
| 5 | Paint colors | Suggests a manufacturer, never proof on its own |
| 6 | Stamp or label | Confirms the maker and often the style |
Look at the face of the column. A tapered keyhole that looks like an upside down teardrop means teardrop, also called Interlake old style. The beam pins are round and sit in the wide part of the hole before dropping down to lock.
A rectangular slot with a slight inward slant at the bottom means new style, or Interlake new style. A mushroom shaped opening belongs to Sammons. Trapezoidal slots in the center of the column face point to Keystone, also called Republic. Side by side slanted narrow slots point to Penco. Plain round holes on 4 inch centers belong to structural rack.
This is the fastest way to identify pallet rack upright in the aisle, and it is why the shape deserves the first look. The hole shape alone will identify pallet rack upright families before you reach for a tape measure.
A tape measure settles what the eye cannot. Measure from the center of one hole to the center of the next, vertically along the column.
When you identify pallet rack upright, write this number down. A 2 inch and a 4 inch system can look almost identical from ten feet away, and the parts are not interchangeable.
The connector is the most reliable evidence when you identify pallet rack upright, because the hole pattern was cut to accept one specific pin shape.
Teardrop beams carry round pins that drop into the keyhole. New style beams use a shaved pin or a tooth pin and often cross fit with teardrop uprights. Sammons beams carry the distinctive mushroom pins. Ridg-U-Rak beams have thin hooked flanges that rest against the ridge of the upright, with a spring and two locking pins inside the column. Keystone and Penco beams use hooks secured by a J-hook or sliding clip. T-bolt beams use a large bolt at each end. Structural beams use half inch bolts through a bolted end plate.
The locking device is part of the identity. A spring with two pins means Ridg-U-Rak. A J-hook means Keystone or Speedrack. A simple gravity seat in a teardrop keyhole means the safety clip should be there, and a missing clip means the connection needs attention regardless of style. Under RMI and ANSI MH16.1 guidance, beam connections need a positive locking device. If you identify pallet rack upright that has lost its clips, replace them before the bay is loaded again.
Paint helps confirm a guess when you identify pallet rack upright, but it changes between production runs and between suppliers. Use it only alongside the hole and connector checks.
| Style | Typical beam color | Typical upright color |
|---|---|---|
| Teardrop, Interlake old style | Orange | Blue |
| New style, Interlake | Orange | Green |
| Sammons | Grey | Grey |
| T-bolt | Yellow | Blue |
| Others | Varies widely | Varies widely |
These combinations are common in North American installations. They are not a standard, so a blue upright is not automatically teardrop. Never identify pallet rack upright by color alone.
Many uprights carry a stamped or roll formed maker mark, a label, or a loading placard with a manufacturer name. Damotech publishes a rack identification chart covering more than 40 North American makers, and it warns that lookalike patterns can differ in spacing, gauge and clip style. A stamp is the clearest confirmation you can get without a drawing.
If there is no mark, the six checks are still enough to identify pallet rack upright for ordering purposes. Send the photo, the hole spacing and the connector description to your supplier.
This table brings the checks together. Use it as a reference to identify pallet rack upright once you have measured the column.
| Style | Connection | Hole shape and spacing | Locking detail | Common region |
|---|---|---|---|---|
| Teardrop, Interlake old style | Pin and slot | Tapered keyhole, 2 in centers | Round pins, safety clip | North America, most common |
| New style, Interlake | Pin and slot | Rectangular slot with inward slant, 2 to 4 in | Shaved or tooth pin, clip | North America, mixes with teardrop |
| Sammons | Pin and slot | Mushroom opening, 4 in centers | Mushroom shaped pins | United States West Coast |
| Structural | Bolted | Round holes, 4 in centers | Half inch bolts, end plate | Cold storage, high impact aisles |
| T-bolt | Bolted | Rectangular slots on column and beam | One large bolt per end | North America |
| Ridg-U-Rak | Hook and slot | Rectangular slots, 4 in centers | Spring plus two pins inside column | North America |
| Keystone, Republic | Hook and slot | Trapezoidal slots, 3 in centers | J-hook or removable clip | North America |
| Speedrack | Bracket | Half inch round holes on column edges, 4 in centers | U-bracket with J-hook | North America |
If you want to understand why these patterns exist and how they got their names, the upright rack column roll forming machine page shows how a post gets punched and formed on one line. The racking line installation report from the United States shows finished frames on a live line.
This is the question behind most work to identify pallet rack upright. Someone has a damaged beam, and they want to know what will fit.
New style beams are the main exception. They are compatible with teardrop uprights, which is why they are useful when sourcing used rack. Beyond that pair, assume parts are not interchangeable. Sammons looks like teardrop but uses mushroom pins on 4 inch centers. Ridg-U-Rak uses a spring lock that has no equivalent in a teardrop column. T-bolt and structural are bolted systems with different hole patterns and end plates.
A beam that appears to drop into the wrong hole is not a fit. It may sit at an angle, or the clip may not engage. Either case removes the rated capacity assumed by the rack design. When you identify pallet rack upright for a repair, match the connector exactly and confirm the load rating with the rack supplier. You cannot identify pallet rack upright compatibility from a photo of the beam alone.
The upright column steel grades guide explains how the column section and grade affect capacity, and the step beam versus box beam comparison covers the beam side of the joint.
Write the result down in a fixed format so a colleague can check how you identify pallet rack upright. A useful record has six lines: style guess, hole shape, measured spacing, pin or hook shape, locking device, and paint colors. Add a straight on photo of the joint and a second photo of any stamp or placard.
Then add two safety observations you find as you identify pallet rack upright on site. Note any bent or dented uprights and any missing beam clips. Under RMI and ANSI MH16.1 practice, a damaged column changes the capacity of the whole bay, and a missing clip removes the lock that keeps a beam seated. Identifying the style is only half the job. The other half is deciding whether the rack is still fit to carry load.
Our punch and die installation guide explains how hole position is held during production, which is why a 2 inch teardrop column from one line will match a beam from another. The how to choose a roll forming machine guide shows how to write those dimensions into a purchase order if you are buying equipment to make the parts yourself.
Q: What is the fastest way to identify pallet rack upright?
Q: How do I tell teardrop from Sammons?
Q: Can I put new style beams on teardrop uprights?
Q: Are paint colors a reliable way to identify pallet rack upright?
Q: What should I do if I cannot identify an upright in my facility?
Q: Why does the hole spacing matter when I replace a single beam?
Start with one connection, a tape measure and a camera. Those three tools let you identify pallet rack upright in a few minutes, and the method works whether you identify pallet rack upright for a single spare beam or for a whole warehouse audit. and the record you keep prevents the wrong beam arriving on the next truck. Our upright rack product page lists the lines that punch and form these columns, and the pallet rack upright profile names guide covers the naming background in detail. Send us a joint photo and a hole spacing, and our engineers will identify the style and flag the tooling needed to make matching parts.
Last updated: 2026-11-18
Article Changelog
2026-11-18: Initial publication. Six-step identification method, connection family map, eight-style reference table, compatibility notes, color clue table, safety record guidance and 6 FAQ.
Next Review Triggers
ANSI MH16.1 or RMI guidance revision; a new connector style entering North American distribution; quarterly SERP check for the focus term; a change in standard hole spacing from a supplier drawing.
Cable Tray Coil Width and Scrap: Yield From Coil to...
Read MoreUpright Punch Tooling for 3 US Hole Patterns: Teardrop, Keyhole,...
Read MoreCable Tray Machine Upgrade: 5 Retrofit Steps That Lift Output...
Read MoreHow to Identify Your Pallet Rack Upright: 6 Punch Patterns,...
Read More