Gutter Roll Forming Machine

A gutter roll forming machine turns flat metal coil into finished gutter profiles. It does this in one continuous pass. Our Believe Industry Company factory in Wuxi, China builds these machines for customers worldwide.

We ship to the US, Australia, South Africa, and over 20 other countries. Each gutter machine runs on Siemens PLC with Yaskawa drives. Standard speed is 10-15 meters per minute.

Types of Gutter Profiles We Produce

A good gutter roll former handles more than one profile. Here is what our machines can make:

Gutter Type	Common Sizes	Material	Typical Use
K-Style Gutter	5″, 6″, 7″	Aluminum, Galvanized	Residential homes
Half Round Gutter	5″, 6″, 7″, 8″	Copper, Aluminum, Steel	Historic buildings, high-end homes
Fascia Gutter	5″, 6″	Pre-painted Steel	Modern commercial buildings
European Style	125mm, 150mm, 200mm	Galvanized, Copper	European construction
Box Gutter	Custom sizes	Galvanized, Stainless	Industrial, commercial roofs
Industrial Gutter	7″, 8″	Galvanized, Stainless	Warehouses, factories

Need a portable setup? Check our portable gutter machine for sale. It mounts on a trailer and goes to the job site.

Gutter Material Compatibility

The material you feed into the gutter roll forming machine determines the final product quality. Our machines handle these metals:

Aluminum — most common for residential gutters
Copper — premium look, 50+ year lifespan
Galvanized Steel — strong, cost-effective
Pre-painted Galvanized — color options, no painting needed
Stainless Steel — for harsh environments

We also build a downspout roll forming machine for the full rainwater system. And a downspout and elbow roll former for corners and joints.

Believe Industry vs Other Suppliers

Not all gutter roll forming machine suppliers deliver the same quality. Here is how we compare:

Feature	Believe Industry (China)	Typical China Supplier	EU/US Supplier
Roller stations	18-26 stations	14-18 stations	16-22 stations
Roller material	No.45 steel, GCR 12, D2, quenched, 0.05mm chrome	No.45 steel, basic hardening	Tool steel, similar hardening
Bearing brand	NSK (Japan)	Local Chinese brand	NSK/SKF
PLC system	Siemens (Germany)	Delta/Mitsubishi	Siemens/Allen-Bradley
Inverter	Yaskawa (Japan)	Local brand	Yaskawa/ABB
Motor	Siemens, 7.5-15 kW	5.5-7.5kW, local brand	7.5-11kW
Encoder	Omron (Japan)	Omron or local	Omron/Sick
Cutting tolerance	±1.5mm	±2-3mm	±1-1.5mm
Price (FOB China)	Competitive, factory direct	Low (variable quality)	2x-4x higher
Lead time	45-60 days	30-50 days	8-16 weeks
After-sales support	Online + onsite available	Limited	Onsite included

Most buyers choose us because they get EU-level specs at China factory pricing. Our roll forming machine division has shipped over 500 machines to date.

Gutter Machine Components

Every gutter machine we build includes seven core sections:

3-Ton Hydraulic Uncoiler — holds up to 3,000 kg coils. Mandrel expands 480-520mm. Yaskawa frequency control.
Roll Forming Mill — 22 roller stations. 75mm shafts in 40Cr steel. NSK bearings throughout.
Straightener — corrects coil flatness before forming.
Hydraulic Cutoff — Cr12MoV die, HRC 58-62. Tolerance ±1.5mm. Omron encoder.
Hydraulic Station — 4kW, ≥12MPa pressure.
PLC Control Box — Siemens PLC + touch screen. Set length and quantity, then walk away.
Collection Table — catches finished gutters at the exit.

These same components power our full range of roll former machines. The control system is shared across our product line, which makes training operators faster.

Quick Specs

Parameter	Value
Forming speed	10-15 m/min
Roller stations	22
Shaft diameter	75mm
Main motor	7.5kW Siemens
Decoiler capacity	3,000 kg
Coil ID	508mm
Max coil OD	1,350mm
Cutting tolerance	±1.5mm
Power	380V, 50Hz, 3-phase
Machine base	H-beam welded, CNC milled

FAQ — Gutter Roll Forming Machine

What is a gutter roll forming machine?

It is a continuous metal forming line. Flat coil enters one end. Finished gutter profile exits the other. The machine shapes metal through 22 sequential roller stations without heating it. It is cold forming.

How fast does a gutter roll former run?

Standard speed is 10 to 15 meters per minute. A 3-meter gutter section takes about 15 seconds once the line is running. Actual output depends on operator speed and material gauge.

What profiles can one machine produce?

Most machines are set up for one profile type with fixed roller spacing. We can design multi-profile machines if needed. K-style and half round typically need separate roller sets.

How much does a gutter roll forming machine cost?

Price depends on the profile, number of stations, and automation level. A standard 22-station machine starts around $25,000-35,000 FOB China. Contact us with your profile drawing for a firm quote. Visit our contact page.

What is the difference between a gutter machine and a portable gutter machine?

A stationary gutter roll forming machine stays in the factory. A portable gutter machine mounts on a trailer. It goes to the job site and produces gutters on the spot. Portable units typically make only one profile and one size.

Do you offer spare parts?

Yes. We stock rollers, cutting dies, bearings, seals, and PLC modules. Parts ship by DHL or FedEx, typically 3-7 days worldwide.

Get a Quote Today

Tell us your gutter profile, material, and output target. Our engineers design a gutter roll forming machine that fits your needs. No cookie-cutter solutions. Every gutter roll former we ship is built to order.

Read more on our rain gutter machine guide. Or visit our buy roll forming machine page to start the process.

Call us at +86 186 1692 7760 or email enquiry@believeindustry.com. Also check our FAQs page for common questions.

Gutter Machine Market Trends (2026)

Demand for gutter machine equipment is growing. The US alone imports over $180 million in roll forming machinery annually, per US International Trade Administration data. Aluminum gutter demand rises with new housing starts.

A factory-grade gutter roll former pays for itself fast. At 12 m/min, one operator can produce 400-500 linear meters of gutter per hour. That is 3,200+ meters per 8-hour shift.

We also partner with NSRBA (National Slate & Roofing Builders Association)-affiliated contractors in North America. Many use our gutter machine alongside standing seam and metal roofing equipment from our full product line.