Skip to content
Home » Interchangeable C/Z Purlin Roll Forming Machine

Interchangeable C/Z Purlin Roll Forming Machine

Interchangeable c/z purlin roll forming machine produce cee and zed purlins with various sizes. And the size adjustment is whole automatic

A traditional c or z purlin roll forming machine only can produce various sizes of c or z purlins. The web size 80-350mm, flange size 50-100mm and the lip size is 10-20mm. The machine needs manual adjust the spacers and replace the cutter blade. And the change over time is at least 2 hours for an experienced engineer.

Believe Industry Company Interchangeable c/z purlin roll forming machine can produce all the sizes of c and z purlin as metioned above. size adjustment is whole automatic and section change is only require 2 minutes. View More.

interchangeable c/z purlin roll forming machine

Layout of the c/z purlin roll former

Introduction of Interchangeable C/Z Purlin Roll Forming Machine

5 Ton Hydraulic Uncoiler

DescriptionSpecifications
Loading Capacity5Ton
Maximum Coil Width:600 mm
Coil Inner Diameter480-600mm
Coil Outer DiameterMax 1600mm
Uncoiling Motor Power4KW
Hydraulic Station Motor Power3KW
Uncoiling Speed12-15m/min, will match the speed of the roll forming machine

Feeding, Guiding and Leveling

DescriptionSpecifications
Width range150-600mm
Cutting Mould MaterialCR12, HRC 58-62
Hydraulic Motor PowerUse same hydraulic station with the post cutter
Pinch Roller MaterialASTM 1045, surface is chromed
Side Wall Panel and WheelsBlack Coating
Lever RollersUpper 3, Bottom 4
Leveling Rollers MaterialASTM 1045, Chromed, 90mm Diameter
Leveling Motor Power5.5KW

C/Z Purlin Roll Forming Machine Mill

DescriptionSpecifications
Thickness1.5-3mm Mild Steel
Roller Stations18-20
Shaft MaterialASTM 1045, 90mm Diameter, HB 220-260
Roller MaterialCR12, quenched 58-62, surface chromed
Motor Power:22KW
Width Adjust Power:0.75KW*2 for flange adjust, 1.5KW for web adjust
Forming Speed12-15m/min( not include punch and cutting)
Driven MethodChain and Gear

Punching Holes Device

DescriptionSpecifications
Punching Mould MaterialCR12, HRC 60-62 degree
Hydraulic Motor Power7.5KW
Hydraulic Work Pressure12-16 Mpa
Length MeasuringOmron Encoder

Multifunctional Hydraulic Cutting Device

DescriptionSpecifications
Cutting Mould MaterialCR12, HRC 60-62 degree
Hydraulic Motor Power7.5KW
Hydraulic Work Pressure12-16 Mpa
Length MeasuringOmron Encoder

Controlled Panel

DescriptionSpecifications
Voltage and Frequency400V, 50HZ, 3 Phase( Please confirm)
Touch ScreenMCGS
PLCPanasonic
EncoderOmron
Frequency Converter BrandYaskawa

Photo Gallery

  • roll forming parts of c and z purlin roll forming mill
  • punch holes device